0
As the load increases on a motor the amperage rises. Increasing the load amps over the motors full load amp rating can shorten the motor's life because of excessive heat. Motors should have overload protection in their circuits to prevent this condition from happening by tripping the motor contactor and opening the motor's voltage supply.
<<>>
Gets very warm .... vibrations., possible melt, seize, much energy expended.
Wiki User
∙ 14y ago
Add your answer:
Earn +20 pts
Is it possible to run two 3Phase Motors on one AC Drive?
Yes provided the AC drive can take load of two motors. But this is not very ideal nor good
Examples of three phase balanced load used in industries?
* 3 phase motors * resistance heaters
DifferEnces of long vs short shunt DC COMPOUND MOTORS?
the basic difference is ,in short shunt motor the series field winding wont carry any current under no load condition whereas in long shunt motors series winding will carry no load current.....
How will star and delta configured three phase induction motors perform as load increases?
Motors with star delta starter, starts with star mode, avoiding inrush of current for a relatively higher starting load, as the speed picks up, it goes to Delta mode with full phase voltage applied across the winding and continues to cater to the designed load.
What is efffect on drift velocity by increasing the potential difference?
Drift velocity increases.
Do motors get load when they are about to brake down?
no they dont
What size breaker do you need for a well pump?
A breaker is based on the amperage that is drawn by the pump motor load. Find the full load amperage of the motor. The wire fed from the breaker has to be rated at 125% of the motors full load amperage. The breaker for motors have to be over sized, usually 250% of the motors full load amps.
What do electric motors require to work?
A load to drive and a supply of electricity.
Why noload current in big motors is higher than load current?
That is not always true.
What wire size for world's simplest motor?
Wire size is based on the amperage of the load. Without knowing what the motors's full load amperage is, an answer can not be given.
What is FLA in electrical terms?
FLA = full load amps <<>> It is a term that is associated with motors. It is the amperage of the motor when it operates at its full rated horsepower under load.
What is AC23?
Alternating Current for highly inductive load i.e. motors...whereas AC21 is for resistive load....i.e. heating elements. this is what you called utilization category...
Is it possible to run two 3Phase Motors on one AC Drive?
Yes provided the AC drive can take load of two motors. But this is not very ideal nor good
Examples of three phase balanced load used in industries?
* 3 phase motors * resistance heaters
What are the effects of use of HYV on the environment?
the hyv efffect on enviroment
What effect do you think this change had on patriots?
to analze cause and efffect
What are the effect of use of HYV on the environment?
the hyv efffect on enviroment
