To cool the water going to the dispenser. Usually a 1/4" plastic coil.
To connect a water hose to your refrigerator for the water dispenser and ice maker, you will need to locate the water supply line behind the refrigerator. Turn off the water supply, then connect the hose to the water line using a compression fitting. Make sure the connection is secure and turn the water supply back on. Check for any leaks before using the water dispenser and ice maker.
The best way to install a fridge water hose for a refrigerator with a built-in water dispenser is to carefully follow the manufacturer's instructions provided with the refrigerator. Typically, this involves connecting the water hose to the water supply line using a compression fitting or a push-to-connect fitting. It is important to ensure a secure connection to prevent leaks and to regularly check for any signs of damage or wear.
your a/c water drainage hose might be clog causing water to go inside,check a/c drain hose on the bottom of the car
The water inside a hose can freeze.
a small tank to hold extra water from the radiator. A hose links the two together
a small tank to hold extra water from the radiator. A hose links the two together
get under the car, follows the water hose to the engine remove the water hose and remove the base where the hose hooks in to and you will find the termostat inside the base.
you need more info than that. you will need to provide the length of the hose and the inside diameter of the hose to calculate the amount of water it will hold
Water from my ac is draining in side the floorboard where is the drain hose on a 99 Oldsmobile intrigue
They were correct in saying that it can be as long as needed because of the low water pressure that an ice maker requires. It also makes your refrigerator more mobile inside your kitchen or other rooms, and the ladies of the house love that part of it. That is of course if they are the type that like changing rooms around to avoid the monatiny
Because - the pressure of the water inside the hose provides counter-pressure, making the hose more difficult to bend.
follow the water hose under the car, remove the base where the water hose hook in to, in it will be inside the base,don't forget to drain the water before you do anything