0
What else can I help you with?
Which cable connects swich to router?
A standard ethernet cable.
What is the name for a cable that connects a comptuter to a hub?
Ethernet cable.
Which is better ethernet or USB cable?
Ethernet has a faster transfer rate then usb.
What connects computers in a single location to other computers at that location?
An internet cable (Ethernet).
What is 10BaseT Ethernet NIC?
It is a Network Interface Card that connects 10BaseT Networks together A 10BaseT Cable is an Ethernet Cable consisting of 4 pairs of wires 2 for transmitting and 2 for receiving
Is the Ethernet cable too big to fit through the wall?
The Ethernet cable may be too big to fit through the wall, depending on the size of the cable and the size of the opening in the wall.
What type of cable used to connect the Ethernet interface on a switch to the Ethernet interface on a router?
To the switch the router is just another host, so it connects with a straight Cat 5 or Cat 6 cable.
What about T1 Cable?
A T1 Cable is the same as an Straighat Through Ethernet cable. Pins used for a T1 are 1,2,4,5 Pins used for Ethernet are 1,2,3,6 www.intelletrace.com
Can I HDMI 1.4 use the Ethernet channel for your PS3 online?
For your PS3 connection you need WiFi or an ethernet cable that is connected to the internet. The HDMI cable only connects the PS3 to the HDTV and will not provide the internet connection.
How can I extend an ethernet cable?
To extend an Ethernet cable, you can use a coupler or a switch. A coupler connects two Ethernet cables together, while a switch can extend the reach of the cable by connecting multiple devices. Make sure to use high-quality cables and avoid exceeding the maximum length for Ethernet cables, which is typically around 100 meters.
How can I safely and effectively run an Ethernet cable through a wall?
To safely and effectively run an Ethernet cable through a wall, you can follow these steps: Plan the route: Determine the path the cable will take through the wall and ensure there are no obstructions or electrical wires in the way. Use a stud finder: Locate the studs in the wall to avoid drilling into them when creating the hole for the cable. Drill a hole: Use a drill to create a hole in the wall where the cable will pass through. Make sure the hole is large enough for the Ethernet cable to fit through. Fish the cable: Use a fish tape or a coat hanger to guide the Ethernet cable through the wall from one side to the other. Secure the cable: Once the cable is through the wall, secure it in place using cable clips or staples to prevent it from getting damaged. Test the connection: Connect the Ethernet cable to your devices and test the connection to ensure it is working properly. By following these steps, you can safely and effectively run an Ethernet cable through a wall.
Which cable is used to connect a router to a switch in packet tracer?
A straight-through ethernet cable.
