The verb "first article inspection" is the act of comparing a physical sample part with the specifications (usually a detail drawing, or blueprint) against which it was made. The sample is usually one of the first parts made from a tooling or a setup, thus the name. Each specification dimension is measured on the physical part, compared against the print, and a list constructed of which dimensions were met and which weren't. For a simple part, this list is quite small. But for a complex part the list of dimensions can be extremely long and the inspection quite involved. By definition, any dimension that appears on the print must be measured on the part and listed in the report. The noun "first article inspection" is the documentation that results from the activity of the verb form. This may also be referenced as a "First Article Report".
Boroscopic testing is a visual inspection test for internal heat exchanger and tube failures using fiber optic and rigid boroscopes, including photography or videotape. Boroscopic testing reveals damages to internal blades etc. Boroscopes are used for inspection in other applications, also. Anywhere access is difficult is a potential application.
After steel is shaped by forging, machining or casting inherent stresses can weaken the article. Normalizing reduces these weaknesses by re-aligning the 'grain' of the steel so that it follows the new shape of the article manufactured. Normalizing steel results in it being strengthened and more ductile. the results in a grain structure of fine pearlite with excess of ferrite or cementite. resulting material is soft : degree of softness depends on the ambient conditions of cooling
This welder is certified to weld on pressure vessels. Testing is done on the weld either by X-Ray or pressure test. The root pass is inspected then the final pass is inspected during the test. If either inspection turns up a flaw, the test is over and you fail.
Divide heat added to the boiler between feedwater inlet and steam outlet by the kilowatt output of the generator at the generator terminals. Rate expressed in btu. See article.
Philippines; Thailand's first line opened in 1894. Philippine's first line opened in 1891
There are a number of different parts that need to be in the right condition to pass inspection. Ehow.com has an article dedicated to this task. Check out this link here: http://www.ehow.com/how_4621957_car-pass-inspection-tune-up.html
Yes, Ellis Island was an immigration inspection station from 1892 to 1954. There is a link to an article on it below.
The first part of an article is the abstract which usually summarises the main idea of the article or drafts up the debated issue.
Article One of the US Constitution creates or establishes Congress. Congress is made up of the House of Representatives and the Senate.
It is not in an article it is in the Bill of Rights and is the first one.
It is not in an article it is in the Bill of Rights and is the first one.
First person, as is a news article.
The very first article, Article I.
form_title= Termite Inspection form_header= Keep your home free of termites with an inspection! Has you home ever had termites?*= () Yes () No How old is your home?*= _ [50] Have you ever had an inspection before?*= () Yes () No
Article 1
To return a salvage vehicle to a regular title a HP106 must be done. The inspection is very detailed and requires a measurement on a frame machine, a alignment is required, inspection and certification of repairs, every thing must be better than required on a normal safety inspection. Where I live current rate is $1050.00 for the inspection, It is tough enough 80% fail first try
Here are a few synonyms: reassessment, revue, recap, follow-up, recapitulation, review article, followup, brushup, review, limited review, revaluation.