The flange adapter is a part that is used to adjust the size to the next piece so it will connect. It can be made out of any material.
it is a flange that's it
No
Not. There's no way to connect a WNF to an RTJ flange.
Weld Neck Raised Face flange
To allow floor flange bolts to have a place to fit and to anchor the flange to the cement /wood decking
The flange adapter is a part that is used to adjust the size to the next piece so it will connect. It can be made out of any material.
You can buy an adapter for that in good plumbing stores, about $5.
What is actually broken the flnge ring rusted out and broke or the abs pipe? Abs pipe/flange broken: Use a ram bit to cut it out and install a new one. http://www.plumbingsupply.com/pvcsaver.html use a compression or expansion flange http://www.plumbingsupply.com/toiletflanges.html or just cut the pipe and put in a new one Flange ring rusted/broken: install a toilet flange repair ring or a spanner flange.
Slip-On Flat Face Flange. It means the face of the flange, the surface the physically touches the next flange is flat as opposed to raised (SORF Flange)
it is a flange that's it
No
Not. There's no way to connect a WNF to an RTJ flange.
Raised face flange end
If it's wide flange, it's from center of web to web distance. Other structural members, it's center of flange to center of flange.
Weld Neck Raised Face flange
To allow floor flange bolts to have a place to fit and to anchor the flange to the cement /wood decking
The term"counter flange" is used in Europe to refer to a mating flange to make up a flange pair. For example a "counter flange" attached to a pipe must have the same bolt circle diameter, number of bolts, and size of bolts and pressure rating at the equipment nozzle flange provided by an equipment manufacturer.