Most infra-red remote controls operate in the region of 36KHz - 40KHz although some are in the 50Hz region or higher.
20695
Supposing you have a remote to control the light, the remote for the light and the remote for the TV are probably on the same frequency.
The "bulb" is an infra-red light emitting diode, normally abbreviated to infra-red LED or IR-LED. It sends a stream of light pulses carrying information to the receiver or sensor on a television. Although it uses light, it is not a part of the spectrum that we can see, so we do not see it operating.
I need to find code for vision quest television
No, TV remotes use IR light and/or RF transmitter.
Wireless mice can use RF (Radio Frequency) or IR (Infra Red) technologies. IR requires line of sight to the mouse receiver, similar to a television remote control. RF is usually the preferred method, since it does not require line of sight. Hope that helps :)
most remotes use infrared light (IR) more expensive remotes use radio frequency (RF) IR is shortrange and requires line of sight... think of it like a flashlight...you could bounce it off a mirror at the TV and it would get there, but if something is in the way the light gets blocked. RF is radio waves and can travel through walls and other objects...to operate devices in another room.
FIXYA.com has the answer under Toshiba 36af42
The peak wavelength of the IR diode used in TV remotes are usually around 940 nanometers.
SInce the Bose uses an RF (radio frequency) remote, and the TV is most likely IR (infra red), you will have to use the IR extenders that came in the box, plug into the IR port on the head, and point the emitter at the IR eye on the device that you are trying to control. This way, you use Bose RF to control the device and get a much better range, and let it convert the commands to IR which the other devices will understand.
Auria TVs use the same codes as NEC. If you lookup NEC in your remote control manual it should work. 10037 will work.
Remote controls use both infrared and radio frequency technologies. Your typical TV remote uses infrared and your typical car remote uses RF.