0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
Backseating a suction shutoff valve will close the?
gauge port
How do you check the tire pressure in your car?
You need to purchase a tire pressure gauge. Using this, remove the dust cap on the tire valve and press the socket of the gauge firmly onto the open end of the valve. The gauge will show the tire pressure in the tire. After using the gauge replace the dust cap on the valve.
What is the correct feeler gauge size to use when setting valve gap on aircooled 1600 vw?
You need two gauges: a .006" "go" gauge and a .008" "no go" gauge. When the valve is adjusted correctly, the .006 will go in and the .008 will not.
How does pressure gauge work?
Reverse airflow feels a chamber inside the gauge and reads the pressure equal to the inside of the tyre its that simple. Same for air compressure, when the pressure is applied it seals the valve on the gauge end then back pressure fills the chamber inside the gauge when you release the gauge from the tyre valve the pressure has gone!!
What are the valve clearances on the Mitsubishi 4d56 diesel engine?
0,25 both regarding to the BOOK
What is the intake valve gauge clearance of Isuzu 4BE 1 engine.?
the clearance of intake valve as far as i know is .18 in.
Valve clearance of volvo f12?
Valve clearance of Volvo f12, are set using a feeler gauge on the lash adjuster.
How do you check out the heater bypass valve with a vacuum gauge in an 89 Plymouth Acclaim 2.5L?
Discard the valve all together and plug the vacuum line as if there was no bypass valve
How do you adjust the valves on a 1998 Honda Civic EX?
The valves on a 1998 Honda Civic EX can be adjusted using a feeler gauge. First remove the valve cover to access the valves. Using a factory service manual look up the proper valve adjustment gauge. Using a special valve socket to tighten and loosen them to the appropriate feeler gauge settings.
How do you check to see if you have vacuum on the modulator valve?
Remove hose and attach a vacuum gauge
What is the valve gauge setting on a 150cc gy6 engine?
.03 intake .04 exhaust
What happen in boiler gauge glass if steam side valve isolate during charge condition?
If steam side valve isolate during charge condition, the water level goes up inside the gauge glass and shows a false level in it. Note that , the water side valve must have opened at the same time and drain valve is in closed condition.
