with PVC glue
well first u take the glue stick and put it in the back of the gun and then plug it in and then press lightly on the trigger!
You need to read and follow the instructions on the package before the first use for keeping the dispensing nozzle clean so glue does not setup in it and plug it preventing dispensing more glue later.However if you failed to do this and now have the dispensing nozzle all plugged up with hardened glue, there is a way that sometimes works to remove the plug of glue (but no guarantees). To do this you will have to unscrew the cap holding the dispensing nozzle from the bottle and push the plug out backwards. If you can do that rinse out any remaining glue residue and put the cap back on. Then make sure you read the instructions before you use anymore of the glue, so you won't be doing this another time!
Pull the plug first. Now if glue is on a plastic part, rub it with a rag and Goof Off, it will soon soften and be peelable. If on a metal part,like one of the prongs, just scrape it off with a craft knife.
Use a heat gun near the plug, it will melt the glue inside and you should be able to pull it out. If it's really stuck, apply the heat and use a vise to pull the plug out.
Not a good idea. Much better to put a gasket material washer on it.
simply buy a new or or use hard glue :P
Chocolate, alcohol, aerosols, salt, teflon, glue, plug in air fresheners, zinc, cooking oil, Febreze, potpourri, candles
glue
gorrilla glue
PVA glue is white glue, yellow glue or Elmer's glue.
Elmer's, Super Glue, Krazy Glue, Gorilla Glue, Araldite, J B Weld, Shoe Goop.