0
What is going on with Silverado driver information centers not working properly?
Wiki User
∙ 9y ago
Silverado driver information centers may not be working properly if the systems are down. Sometimes the center may need their I.T department to work on improving their systems.
Wiki User
∙ 9y ago
Add your answer:
Earn +20 pts
Will a knock sensor stop a transmission from working properly in a 1994 Chevy Silverado?
NO.
Why would a 1992 silverado with a 350 be backfiring cold?
the choke is not working properly
RPM and speedometer not working 1995 silverado 2wd?
rpm and speedometer gauges not working 1995 Chevy silverado 2wd
What would cause the ABS light to stay on after breaking hard on a 96 Chevy Silverado Z71?
The ABS computer has detected a fault and is informing you that it's not working properly.
The abs brakes come on when you turn left and brake on a 2001 silverado 4x4 why?
The sending unit on one of the front wheels may be loos or not working properly. Make sure that the connectors to the abs sending units are properly seated.
Why does the air only blow through the defrost ducts nomatter what you set the control for on your 2004 Chevy silverado?
Still unknown reason why, but after resetting system that is digitaly controlled is now working properly. THANKS DON.
Why would a 03 Chevy Silverado 5.3 overheats when air condition is on?
I would suspect the cooling fan is not working properly. One of more of the cooling fans should run continuously when the A/C is on. If not the engine will overheat.
How can you tell if thermostat is working properly?
It will keep the temperature within pre-set limits if working properly.
When should you replace alternator for 2003 silverado?
only when it stops working.
When a catalytic converter is not working properly will it cause the engine to not run properly?
it is ok to continue driving the vehicle while the catalytic converter is not working properly?
How do you check if RTD pt100 is working properly?
To check if RTD PT100 is working properly you need to check and make sure all the wires are connected. Take several readings and if they are the same, it is working properly.
What are the indications of RAM working properly?
If you want to know if your RAM is working properly you could look on you computer information to see if the amount of RAM that is in you computer matches up with what your computer tells you. For instance if you know that you've installed 8GB of RAM in your computer and when you turn it on the computer tells you that you have 8GB of Ram in your computer it should be working correctly. Also there are tests that will look at your RAM to make sure that it is running properly.
