A 10 amp 12 volt charger.
The current will increase to a very large value
A: Simply by adding a series resistor from the battery charger. WHAT VALUE? find the current required and use it to IR drop the voltage
Depends on the maximum current you can get out of the battery, and the maximum current whatever the battery is hooked up to can draw.If the max current drain of the load is less than the max of the battery, then you'll only get the lower value. If you'd hook the battery to a small LED light, you wouldn't be getting many watts at all. If you'd short the battery terminals with a nail or something you'd get a HUGE number of watts very briefly, until something broke.
Sorry, my crystal ball is recharging right now.
4.8 ohms
dc flux is caused by dc current (flux and current are proportional), it is a constant value. Put an inductor (or transformer winding) across a battery and you will get dc flux. ac flux is caused by ac current (flux and current are proportional), it is a moving value, the flux moves with the current, typically cyclical but the waveform is arbitrary as long as we're moving.
i think average value of current in ac current is zero.
Either the actual value of something, or the value of a current. It really depends on the context.
“What is the current market value of siver by the ounce”
In a very simple way. As long as nothing changes in the circuit, the current that flows from the power supply or battery into the circuit is directly proportional to the voltage of the supply. -- If you double the voltage across the ends of the circuit, the current will double. -- If you turn the voltage up to 3.4027 times its original value, the current will increase to 3.4027 times its original value. -- If you decrease the voltage by 81.7 percent, the current will decrease by 81.7 percent.
The fusing current is a value of current that causes the fuse to melt and interrupt the flow of current. Usually, reference is made to the minimum fusing current which is the smallest value of current that will cause the fuse to melt.
The hFe (current gain) on the BC148 ranges from a minimum value of 20 to 100, depending on collector current, with a maximum value of 300.