Yes, you can change the color of the grout. There are products that you can use to try to die the grout or you can just have your tile re-grouted.
Grout is not toxic. Grout sealers and adhesives can be toxic but not the grout itself. Tami Barker www.mosaicforms.com Mosaic Art Instructor and Creator
Not JUST a grout no. You can get a cement that will also work as a grout but a pure grout would not have the adhesion required to stick the tiles to the wall properly, you should not use it as a cement.
You can. It is less gritty but it works. Edit - While this is true, it's important to understand the wall grout is designed for thinner grout lines, so if you use it on the floor, make sure your grout lines are thin. Otherwise, the grout will crack.
The obvious answer is sanded grout has sand. But the in depth answer has many differences. Sanded grout which is the most common, can be used in a grout joint from 1/8" to 1/2" (and larger but check the grout). Sanded grout scratches many tile like glass. Non sanded grout can only be used on joints 1/8" or less. Non sanded grout is typically seen on marble and granite tile, many wall tile, and all glass tile.
Yes, you can change the color of the grout. There are products that you can use to try to die the grout or you can just have your tile re-grouted.
The sealant goes on the grout not on the tile & yes it is a great idea & do it quickly before the grout starts to get stained by use.
you can use it right after the grout dries (usually at least a day). . .let the grout cure for at least 30 days before you seal it though when you use the shower before the grout is cured, make sure you don't leave any standing water
C. J. Billington has written: 'Grouted repairs to steel offshore structures' -- subject(s): Grout (Mortar), Maintenance and repair, Offshore structures, Tubular steel structures
S. P. Signer has written: 'Field verification of load transfer mechanics of fully grouted roof bolts' -- subject(s): Bolts and nuts, Fatigue, Grouting, Mine roof bolting, Testing
The gaps found between most tile work are called grout lines. After the tile was set those voids or gaps should have been grouted. Luckily it is never too late to apply the grout. You can get a small box of tile grout from any hardware shore. It's real easy to apply. Just follow the instructions on the box.
form_title= Tile Grout form_header= Give your home a face lift with new tile grout! Do you want to install new grout?*= () Yes () No () Not Sure Do you want to clean out old grout?*= () Yes () No () Not Sure What color do you want the grout?*= _ [50] How old is the grout in your home? *= _ [50]
if your grout line is less than 1/4" you use smooth grout, above that you use sanded grout.
The old grout can be cut out. The mist efficient way is with an oscillating tool with a grout blade. After the old grout is removed then new grout can be installed. This is a time consuming project.
250 pounds. This is not a correct answer. It all depends on the commode. A Kohler K-4330 has a maximum of 500lbs and it is wall mounted. I do not know on other brands but you would have to check with the manufacture (As I did) to see the weight limit of any specific commode. Both answers are correct/incorrect: The load rating is only as good as the installation. If the toilet is hung on a cinder block wall with lead/plastic seating anchor bolts and grouted in using regular grout it won't hold more than about 200# (assuming a 200# person sits very lightly). If the toilet is hung on a reinforced CONCRETE wall using stainless steel anchors set in epoxy then it will easily exceed the manufacturer's load rating. If the toilet is anchored to concrete (as mentioned above) and grouted in with a quality epoxy based grout it will be able to handle 500+ pounds with ease, but I pity the person who ever has to take out that toilet
Grout is not toxic. Grout sealers and adhesives can be toxic but not the grout itself. Tami Barker www.mosaicforms.com Mosaic Art Instructor and Creator
The likely word is "grouted" (sealed, caulked or waterproofed).