Want this question answered?
What are cylinder head bolts torque settings for Isuzu kb240. Engine NAQ001716
45 ft-lbs lubricated with engine oil.Oil pump 35 ft-lbs.Head bolts 85 ft-lbs.
Sohc engine m11 bolts 47ft lbs, m8 bolts 180in lbs DOHC engine step1 21ft lbs step2 47ft lbs
75 lb/ft Long Bolts 65 lb/ft Short Bolts
TUD5 engine head torques Stage 1. 40NM Stage 2. + 260 degrees Maximum head bolt length is 197mm.
Engine code 176A7.000 camshaft carrier/cap torques M8x1.25 = 20Nm M8 = 10Nm
The International 444 diesel engine head bolt torque specifications is 350 pounds per square inch. The head bolts should be torqued at 70 pound intervals.
38ft/lb for the mains
The head bolt torque specification for your Toyota 3.0 liter engine is 150 pounds. The head bolts should be torqued in 50 pound intervals.
TU9 engine head torques Stage 1. 20Nm Stage 2. + 240 degrees Maximum bolt length is 176.5mm.
its a vague question but i think you need to separate the transmission from the engine they are connected with a splined shaft and they must be pulled straight apart before removing
All bolts in any vehicle have specific torque ratings. -There are usually at least 35-50 specified torques for all the bolts. -You haven't said WHICH bolts you want the torque value for, so we can't answer. -Your best bet is to buy the specific manual for your car where all the torques will be written in one page.