0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
Which variable frequency drive should I use for a 1.5 ton inverter AC?
You do not need to use an external variable frequency drive for the said AC. You have mentioned that it is inverter AC. It means the AC is already fitted with a built in inverter. Even if you connect an inverter to the AC, you need another control device to control the VFD to control the speed of the fan/ compressor depending upon the room condition, external temperature, temperature setting etc. It is little complicated.
An scr is an electronic device that?
That is used as a switching device. They are very common in Inverter circuits and can switch up to 1000's of amps.
I have a 5kVA inverter and the inverter will be off always. when the main source fails the inverter should feed supply to laod. in this case my inverter is overloaded due to initial surge. what to do?
To prevent you backup Inverter from sudden overloading. You should manually control your Inverter. When power fails. Shut down all loads. Turn on your Inverter with a with no loads on the AC line. The slowly begin to turn on loads to your backup Inverter. Start with just the lighting systems and then work you way to higher current loads such as Air Conditioning Units. Another way to solve your problem is add maybe 5 additional Units in parallel. You need to calculate all the power loads in your house is using making sure your inverter can handle the complete load. Why the Inverter fails is due to high inductive loads. The Inductive loads appear as a short circuit to you Inverter. The only way around that problem is to limit the number of inductive loads the your Inverter is supplying power to.
How is an inverter constructed?
type of inverter
What is a control switch?
a control switch is a sort of remote controlled relay attached to home appliances which consumes more power.
Does an inverter on a 5th wheel have an on off switch?
Does an inverter on a 5th wheel have an on off switch
Are a switch and inverter the same?
No. A switch can turn the electricity on/off, but an inverter can provide electricity(for a limited amount of time) if their is a power failure.
Where is the ac power inverter reset on the jeep 2008?
The Jeep air conditioning power inverter reset switch can be found on the firewall in the engine compartment. The switch will be on the passenger side of the firewall.
How long can you make use of the AC of an inverter?
Until you switch off!
Principle of inverter?
voltage control tech.of inverters??
How do you make a inverter?
Capacitors to store DC voltage, transistors to switch power to the AC load, plus control circuitry to time the switching to match the (assumed) 60Hz AC frequency.
How do you make a 1000watt inverter?
Capacitors to store DC voltage, transistors to switch power to the AC load, plus control circuitry to time the switching to match the (assumed) 60Hz AC frequency.
Which variable frequency drive should I use for a 1.5 ton inverter AC?
You do not need to use an external variable frequency drive for the said AC. You have mentioned that it is inverter AC. It means the AC is already fitted with a built in inverter. Even if you connect an inverter to the AC, you need another control device to control the VFD to control the speed of the fan/ compressor depending upon the room condition, external temperature, temperature setting etc. It is little complicated.
What is working principle of inverter welding machine?
Digital Control of welding when welding
What is self control of synchronous motor drive?
the self control of a synchronous motor is done using an inverter fed through a dc link.speed is controlled by varying the output frequency of the inverter by controlling the dc link voltage
How do you design a multilevel inverter?
the design of multilevel inverter can be done by using is the mosfets ....multilevel inverter is the inverter which cna reduce the harmonics by increasing the voltage levels ANSWER: The design of multilevel converter is the same as a single converter. The feedback control however comes from the most hi current output capacity circuit.
The major difference between inverter and ups?
An inverter simply takes a DC voltage, usually from a battery, and converts it to AC for use by standard appliances. A UPS does the same thing, but has added circuitry to charge the battery when AC utility power is available, and to automatically switch the inverter on when utility power fails.
