how to change number 6 spark plug on a 2006 mitsubishi galant
2002 galant , can't find the spark plugs
When changing the spark plug gaps it is important to remember the gap size. The gap size for a 2003 Mitsubishi Galant 4 cyl spark plugs is 0.044 inches.
No. There is nothing involved in changing plugs that requires or draws electrical current.
On a Mitsubishi Galant 2000, an idle on the vehicle could come from lots of things. Changing and cleaning fuel system and its components. Changing spark plugs and making sure wires are clean, rust-free, and tight.
It is most likely your spark plugs and or wire set. All of this is easy to change. There is another forum that explains how to change your spark plugs for your Galant.
NGK platinum plugs
Most had a V-6 under the hod, which would mean 6 spark plugs.
Obviously- the spark plugs were not the issue :)
pcm or crank sencer
Its under the piece of plastic on top of the engine.
Changing your spark plugs could theoretically make your car faster but not enough to make a noticeable difference. Changing your spark plugs when they are worn will increase your fuel mileage slightly.
Only if there's something wrong with your old spark plugs.
Changing spark plugs can be an easy task. Disconnect the battery and the spark plug cables, remove the old spark plugs, replace with the new spark plugs, connect the spark plug cables and the battery.
Changing spark plugs is an important task. To do this, disconnect the battery and spark plug cables, and remove the old spark plugs. Next put in the new spark plugs, and reconnect the spark plug cables and then the battery.
When changing the spark plugs of a car, it is important to remember to gap the spark plugs. The gap for this cars spark plugs are 0.051 inches.
Changing spark plugs is relatively easy. Disconnect the batter and spark plug cables, and remove the old spark plugs. Next replace the spark plugs with new ones, reconnect the spark plug cables and battery.
Changing spark plugs is pretty simple. Disconnect the battery, remove the wires to the spark plugs from their location, remove the old spark plugs, put in the new spark plugs, plug the cables to the right spark plug and reconnect the battery.
Changing spark plugs is an easy task. Disconnect the battery, disconnect the cables, remove the old spark plugs, put in the new spark plugs, reconnect the cables, and reconnect the battery.
you need to take the intake off to get to the back three plugs...
No you do not need to replace any plugs at all when replacing wires.
yes it can
if its got a v-6 in it it has 6, if its a 4 cyl. it has 4
No. Spark plugs have nothing to do with your turn signals. Try changing the turn signal bulbs. Spark plugs are only used for the combustion of the engine.