answersLogoWhite

0

you have to pull the axle completely out of the rearend and the bearing is on the axle and you have to press it off the axle to get it off and press the new one on.

User Avatar

Wiki User

16y ago

What else can I help you with?

Related Questions

Wheel base on 78 nova 2 door?

108"


What wheel size is stock on a 1970 Chevy Nova?

14X7, rally wheel, or 14X6, stock rim with hub caps.


How do you remove the dash out of a 71 nova?

first lower or remove the stering wheel.


Will a 1979 nova's wheel hub transfer over to an 1980 Monte Carlo?

It should.


How do you pull the steering wheel off of a 1976 Chevy Nova?

pull the center pad off the wheel and then take the nut off that holds the wheel on and then get a steering wheel puller and hook it up and pull the wheel off the splines.


Will a 15 by 8 inch wheel fit on a 72 Chevy Nova?

A 15 by 8 inch wheel can fit on a 1972 Chevy Nova, but you need to consider factors like the tire size, offset, and whether the vehicle has been modified. The stock Nova typically has a wheel well that can accommodate wider wheels, but you may need to ensure there is sufficient clearance for suspension components and fenders, especially if the car is lowered. It's advisable to consult with a wheel specialist or use a fitment guide to confirm compatibility.


What needs to be done to put a 400 crank in a 350?

Use good pistons. Be sure to plastigage the bearings. Don't forget to put oil in it when you're done. If this is in a Nova, give it to me when you're done. I've always wanted a 383 Nova, but can't afford it.


What are the five categories of fonts?

Clarendon, SF Fortune Wheel, Bank Gothic, Arial and Prixoma Nova


Can a 16 40 offset wheel fit a 1973 nova?

A 16x40 wheel likely refers to a 16-inch diameter with a 40 offset, which may not be compatible with a 1973 Nova. The Nova typically requires wheels with a backspacing and offset that accommodate its suspension design and fender clearance. It's essential to verify the specific measurements and clearances of your Nova, and to consider tire size as well. You may need spacers or different wheels to achieve a proper fit.


How do you replace a steering wheel on 1974 nova?

To replace the steering wheel on a 1974 Nova, first disconnect the negative battery cable to prevent any electrical issues. Then, remove the steering column cover by unscrewing any fasteners, and carefully take off the center cap of the steering wheel if applicable. Use a steering wheel puller to remove the wheel from the column, and then install the new wheel by reversing the process, ensuring that all connections are secure and the wheel is properly aligned. Finally, reattach the battery cable and test the steering for proper function.


What is the Wheel size for a 1963 Chevy Nova?

13 inch, 4 lug, and I think 5 inches wide.


What Tilt steering column fit 1970 nova?

70's nova's had a tilt wheel as an option so if you could find one that would be the best trick but you can get a custom steering column for it from ididot.com.