Want this question answered?
During the whole process the car should never have to be started.Position 1 is in the off position, or the same as when you just put the key in and don't do anything, and position 2 is in the Accessory position. Same position when all the dash lights are on. And you can turn on electrical items in the car.Here are the steps to reset the oil change interval warning on the ML320. This is usually shown as the double wrenches in the sight panel, with the mileage to service left numbers. This will keep counting down in intervals of 50 mile segments until you reset this indicator. And a "!" indicator will then occur to mean it is now really due for a oil change.1) Put in key ignition and turn it to position 2(Ignition on)2) Within 5 seconds of turning it to Position 2 press and release left button 2 times3) Turn key to position 1 (Ignition off)4) Before turning to position 2 again press and hold the left odometer button, and then turn the key to position 2 again. Do not release the button until you hear a series of beeps, and the new indicator will read 10,000 miles. You now have 10,000 miles before your next oil change. Standard on all Mercedes ML320's.
place key to position 1 and press botton left of odometer reading for 30 seconds then to position 2 and do same again then start engine! if this doesnt work then! waaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa!
It is important to maintain the fluid levels in a car with the right types of fluids. The 2000 Mercedes Benz ml320 take Q-1-46-0001 power steering fluid.
Resetting FSS 1 Turn key to position 2 (before Start) 2 Within 4 seconds press button 1 twice (left of speedo) 3 The present status for days or distance is displayed. Within 10 seconds turn key in steering lock to position 0 ( position where key can be removed). 4 Press and hold button 1, while turning key in steering lock to position 2 again. The present status for days or distance is displayed once more. Continue to hold button 1. After 10 seconds a signal sounds, and the display shows 15,000 km or 10,000 miles for 10 seconds. 5 Release button 1.
If it's like the 83 380 Sl, have to have ignition key in 1 or 2 position, then turn glovebox lock, clockwise, then opens. Very hard. Good luck, Annette Graves netter_in_ks@yahoo.com
Key on position 1. press OK and Accept-Call switch ( on steeringwheel) simultaneous, wait till new screen appears. Then select the right maintenance menu; very easy.
1) Turn key to position 2.2) Press/release the R button to show the next service due light. Release button.3) Turn key to Off.4) Press and HOLD the same R button to view the service light, THEN, within 2 seconds, turn key to position 2.5) Wait up to 10 second and the light will reset to show new service .
1 turn key to #2 position 2 go to mph display in the cluster 3 turn key to off position 4 turn key in # 1 position 5 press trip odometer knob three times (QUICK) voltage will appear on display 6 select Up Arrow (shows service menu) 7 select confirmation using minus (-) key 8 Press the left menu systems button 9 full service will be highlighted 10 Press and hold left menu system button until service confirmed message appears
turn the key to position #1 press the "accept call" button then press "ok" button scroll and find "assyst plus" then hit ok find the "full service" option and hit ok
1 turn key to #2 position 2 go to mph display in the cluster 3 turn key to off position 4 turn key in # 1 position 5 press trip odometer knob three times (QUICK) voltage will appear on display 6 select Down Arrow (shows service menu) 7 select confirmation using - 8 Press the right menu systems button 9 full service will be highlighted 10 Press and hold right menu system button until service confirmed message appears
1) Turn key to position 2. 2) Press/release the R button to show the next service due light. Release button. 3) Turn key to Off. 4) Press and HOLD the same R button to view the service light, THEN, within 2 seconds, turn key to position 2. 5) Wait up to 10 second and the light will reset to show new service .
Mercedes E service is due at 40,000 miles. What needs to be done is based on what is required at that time and that depends upon what has been done and what has not. In Mercedes, all service codes can be reviewed in the dash board. Here is how you can see them: Close the door Put key in and turn it to position 2 Page up or down till you see outside temperature Turn key to position 1 Push odometer reset 3 times quickly You should now see battery volts displayed Use page up or down to get to different service menus Now call your mechanic or the dealer and find out what it would take to do those services.