Your closing the circuit!
This type of circuit would never be used. The two way fluorescent system would depend on the voltage being supplied by the two lamp circuit switch. If the switch turns off the two lamp circuit the rest of the circuit with the fluorescent fixture would become inoperable.
Please re define "If an insulator with a lamp"
Check the wire that goes to your break light. Somewhere along the circuit it is grounded before the lamp and after the switch. Look on the circuit from the switch to the lamp. What is happening is, the circuit is good up to the time that you apply the break. This closes that brake light switch, When the switch closes it sees the dead short and not the lamp. The breaker popping is protecting the circuit wiring from burning up.
what is a circuit breaker / fuse current rate value for lamp and fan load circuit
Your closing the circuit!
The "hot" conductor of the lamp circuit.
No.
Parallel Parallel
Parallel Circuit
Parallel Circuit
similarity between lamp and LED- lamp in simple current is used to show that current is flowing and LED performs the same task but in electronic circuit .difference between lamp and LED-lamp in simple current is used to show that current is flowing and LED performs the same task more efficiently but in electronic circuit . so LED works more efficiently in electronic circuit than lamp which performs task in simple circuit.
There will be no change, because it is a parallel circuit.
An incandescent lamp can be used to check continuity of a circuit.
The function of a choke in a lamp circuit is to produce high voltage. In tubelights, the high voltage is essential for ionisation of the gas which is present in tubelights.
A simple circuit consists of a source of electro motive force ( EMF or voltage V ) This could be a battery,dynamo or solar cell. The circuit should do something, like light a lamp. For the lamp to glow there must be a flow of electrons called an electric current measure in Amperes (I). For the current to flow the circuit must form a closed loop, like a daisy chain. A switch is a device that breaks this loop and controls the state of the circuit. Closed circuit, switch closed, = lamp on Open circuit, switch not closed = lamp off
no because when you remove the lamp the circuit is still open; even if the switch is on