CAS and RAS Latency are two ways of measuring speed
CAS (column access strobe) Latency and RAS (row access strobe) Latency
it depends on more then rotational speed. The Rotational speed and latency time is related as follows: Latency time = (1/((Rotational Speed in RPM)/60)) * 0.5 * 1000 milli seconds
delay to access the data in cache in context of processor's speed. Time to access the requested data in cache , at that time processor have to wait .. is called cache latency.
Latency is defined as the network speed in which the information being broadcast from the original server reaches the individual's device by measurement of milliseconds. This means that a lower latency will allow more information to be sent or received and thus, creating a better experience. Improving low network latency can be accomplished by establishing more latency-sensitive software so that multiple tasks and improved performance can occur.
high latency means you have a good connection, low latency means you have a baad connection
The Latency ended in 2011.
The Latency was created in 2006.
A transcontinental fiber link might have many gigabits/sec of bandwidth , but the latency will also be high due to the speed of light propagation over thousands of KM.In constract a 56 kbps modem calling a computer in the same building has low bandwidth and low latency
Lag is followed up by latency. If you detect latency but not lag, then someone else has it.
latency = transmit+propagation
Sleep latency-- The amount of time that it takes to fall asleep. Sleep latency is measured in minutes and is important in diagnosing depression.
"CL" stands for "Column Access Strobe Latency," which refers to the time it takes for a memory module to access data within a column. "RL" stands for "Row Access Strobe Latency," which refers to the time it takes for a memory module to access data within a row. These latency values are important in determining the speed and performance of memory modules.