It is a variable or a component of a variable.
It is a variable or a component of a variable.
Digital Electronics deals with logic 1 and logic 0, where logic 1 is represented by one voltage and logic is represented by another voltage.(ie. it is a discrete representaiton of analog signals). The main advantage of digital signals over analog signal is that it is less prone to noise.
OR diagram is a drawing or plan of the digital logic OR function, it is not able to actually do anything only tell a person something about this logic functionOR circuit is the actual electronics implementing the digital logic OR function, it is actually able to carry out this logic function in a digital device or system
The answer is C.
In some types of electronic design you may have Digital circuits also called Logic Circuits and Analog circuits. Each circuit may have separate power and ground lines. So you may see the notation on a schematic for Logic Ground or Analog ground.
no
All digital electronic circuits are composed of logic gates. Without logic gates there would be no digital electronics.
Digital Logic
And,or,not
An accumulator is a register where arithmetic and logic operations are performed and their results stored (accumulated). Usually one operand was already stored in the accumulator while the other came from memory, the immediate value field of an instruction, or if the computer has them another register.Many early computers had only one accumulator and a small number of index registers. On such machines the accumulator register itself is the ALU, it has all the special circuits inside itself to perform those operations and modify its own contents. The flipflops that store the data in an accumulator are usually JK-flipflops, which simplify the design of those special circuits.Later when computers began to use multiple general purpose registers the concept of the accumulator fell out of favor. On such machines one separate ALU was shared with all the registers, which were reduced to just a small bank of very high speed RAM with no special circuits like accumulators usually have.
Digital Electronics deals with logic 1 and logic 0, where logic 1 is represented by one voltage and logic is represented by another voltage.(ie. it is a discrete representaiton of analog signals). The main advantage of digital signals over analog signal is that it is less prone to noise.
The register that stores the result of (an arithmetic) or logical result is the accumulator.
OR diagram is a drawing or plan of the digital logic OR function, it is not able to actually do anything only tell a person something about this logic functionOR circuit is the actual electronics implementing the digital logic OR function, it is actually able to carry out this logic function in a digital device or system
the accumulator is an 8-bit register then is part of the arithmetic/logic unit(ALU). this register is used to store to store 8-bit data and to perform arithmetic & logical operation. the result of an operation is stored in the accumulator. the accumulator is also identified as register A.
it is a signal of digital logic
A logic gate is used to implement any digital logic. It may be AND, OR, XOR, NOT, XNOR, NAND, NOR. These logic gates can be used to implement the output equations of digital circuits in order to design them.
M. Morris Mano is known for writing several influential textbooks on computer science and digital design, including "Digital Design" and "Computer System Architecture." These books are widely used in engineering courses and have helped many students understand the fundamentals of digital logic and computer architecture.
One of the biggest applications of digital logic is using circuits to perform arithmetical operations. While theoretically, any number system could be used, binary is the most simple to express in terms of digital logic circuits.