I've put down 44 psi with a tune.
You are going to want to see about 12psi at max boost. If you have exhaust leaks from the y-pipes that can cause it to be lower and may not even notice unless you are monitoring the MGP. Hope this helps
I don't know what average miles per hour is, but max speed for the 7.3L Powerstroke Diesel is around 105 miles per hour. And if you meant to type miles per gallon (mpg), the combined average of a 7.3L Powerstroke is from 17mpg to 19mpg.
JCB diesel max whose speed is 512.26kph
water max boiling is 100 c. and diesel max boiling is 365 c.
salma max if you boost attack to full
The chevy 6.2 vortec max package is a gas engine, however Chevy did make a 6.2 diesel engine that was used for military vehicles. The diesel 6.2 is no longer available.
0.05% by volume.
if an 8 ply, cold max is 65, if 10 ply cold max is 80. most people will run about 10 psi short of this. If it's a diesel sometimes the more the merrier. closest to max that is. if you tow, close to max for sure. tires need this to cool efficiently. watch the center of your tire tread, if the center is wearing faster, back the pressure off some, 10 lbs or so.
No,but a good tip for a large amount of boost is to do alot of tricks
on the side of the tire it will tell you the max pressure
max 50 ppm
I believe you are talking about a common rail fuel system.It doesn`t send fuel to all injectors at once but the fuel pressure is 24,500 psi with a 26,500 relief valve for pressure spikes.If you are attempting to work on this engine yourself I would recommend taking it to a professional because of the safety risks when dealing w/pressures that high. The only diesel system that sends fuel at pressure to all injectors at once is a HEUI style injection system where high pressure oil and computer control deliver pressurized fuel into cylinder.Fuel pressure is max 80 PSI.Hope this info was helpfull.