Maximum power rating describes the maximum power at which a device can operate without reaching an excessive temperature. For example, in the case of a resistor, if its maximum power rating is exceeded, then it may burn out.
what is the power rating of a transister
100MVA
If, by smaller in size, you mean physical size, then yes. You just need to keep the same capacitance and minimum voltage rating. Also, in a power supply filter application, you need to consider the maximum RMS current rating.
generally rating means the condition when the machine can give maximum efficiency without being overheated .In transformers and generators it is decided by core as well as copper loss(flux proportional to supply voltage,current proportional to copper loss).so both are rated in kVA whereas motors are rated as maximum output they can deliver i.e kW.
the maximum rating is 60 hz . it is work in50hz
tmcr=turbine maximum continuous rating bmcr=boiler maximum continuous rating
The maximum station output is governed by the rating of the generating equipment installed in the power station.
The power rating of a resistor is determined by its physical size. The greater its surface area, the better it can dissipate energy, so the higher its power rating. Knowing its power rating and its resistance will determine the maximum voltage that can be applied to it in order to ensure the resulting current doesn't cause the resistor to overheat. This can be determined by manipulating the equation, P = U2/R.
The maximum rating or a VCB is 32 KV.The maximum curent rating is up to 3000 A.
We suggest the JX250/1 for minimum power and the JX500/1D for the maximum power rating. Feel free to call us to place your order 800-854-5821 Thank you
maximum continuous rating, the maximum power that the engine can run on continuesly without affecting service life. For instance full power can only be used for shorter periods of time...
BMCR is the boiler maximum continous rating .It is that the maximum temperature , steam flow or the pressure that is used to generate full load or the bolier can withstand.TMCR is the turbine maximum continous rating .It is that the maximum temperature , steam flow or the pressure that the turbine requires for generating full loadNOTE:BMCR WILL BE MORE COMPARED TO TMCR
That number refers to the maximum load rating(94) and the maximum speed rating (V)
It depends on the voltage applied across it. But the maximum current is limited by the power-rating of the resistor (power divided by the square of the voltage).
maximum demand, energy, kva rating, and power factor
what is the power rating of a transister
All transformers have a power rating given in kVA which determine the maximum load that can be connected to that transformer.