0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
what is a class 5 finish for concrete?
A class 5 finish is meant for concrete exposed to the weather and/or harsh conditions.
Using the a grid create a shape with the perimeter of 5 plus 4 plus 5 plus 4?
5+4+5+4
What percentage of Tin is made using recycled metals?
5%
How do you cut metal siding?
Metal siding can be a little tricky to cut, but with the right tools and techniques, you can make it a snap!Things You'll Need:Reciprocating sawAbrasive saw bladeTin snips (aviation snips)Jump shear (metal shear)Electric shearsStep 1 Reciprocating saw blades are one option for cutting siding. They pack a lot of power, and can easily cut through the metal. However, they do have a tendency to break blades, so you'll want to make sure you have some spare blades laying around before you get to work. Also, the finished edge is not very smooth, so you'll want to watch out for that.Step 2 Abrasive saw blades also work well for siding. The pro's are that the finish is rather nice, and they cut through the metal quickly. However, the con's are that they also produce a shower of hot sparks which can damage paint and create a hazard in the work environment.Step 3 Hand held tin snips are a cheap method of cutting metal siding, but will come at a cost to your hands. They are tough to operate for long periods of time, and could leave you sore and tired. Better for small and delicate jobs than long periods of cutting.Step 4 A jump shear is another good alternative for cutting siding. It is an easy method with quick results requiring little effort from you. However, you are limited to the width of the jump shear, often only 4 feet wide.Step 5 The last method, and one of the best, is to use electric shears to cut through the siding. This method works well and is very efficient. Just make sure the shears are large enough to handle the job, and that the jaws can reach over the high and low parts of the siding.
What are the factor using powers of 50?
2 x 5^2
A home owner should get at least 5 quotes before deciding on a siding contractor. ?
A home owner should get at least 5 quotes before deciding on a siding contractor.
What forecast is seen in the siding industry?
Fiber cement siding is expected to lead industry growth with 5 percent gains each year due to its increasingly popularity over wood siding products.
What are the release dates for Exposure - 2012 1-5?
Exposure - 2012 1-5 was released on: USA: 16 January 2013
What are the release dates for Exposure - 2000 1-5?
Exposure - 2000 1-5 was released on: USA: 3 May 2000
How does a 5 feet and 4?
The answer will depend on what it is that the "5 feet and 4" is meant to DO.The answer will depend on what it is that the "5 feet and 4" is meant to DO.The answer will depend on what it is that the "5 feet and 4" is meant to DO.The answer will depend on what it is that the "5 feet and 4" is meant to DO.
What is the ISBN of Unnatural Exposure novel?
The ISBN of Unnatural Exposure - novel - is 978-0-4251-6340-5.
What are the release dates for Fame - 1982 Double Exposure 5-15?
Fame - 1982 Double Exposure 5-15 was released on: USA: 22 February 1986
How do you miter outside corners on beveled siding without a compound miter saw and what are some helpful tips?
I'm not sure I understand the material your using. I'm assuming it is wood. IF so, don't miter them unless you have a good supply of valium. Take two pieces of 5/4" and rip them down to make a corner. The siding will dive into the corner and look good. All straight cuts, no valium. BCLEAR. If your saw has a big enough blade, lay siding flat, face up on saw. You place spacer piece, that is the same thickness of the butt of the siding, under the thin edge of the siding, to mimic how it would lay on the wall, then cut a 45deg. miter. Test & adjust w/ scrape pieces till you get it right.
What are the release dates for Northern Exposure - 1990 Russian Flu 1-5?
Northern Exposure - 1990 Russian Flu 1-5 was released on: USA: 9 August 1990
What are the ratings and certificates for Numb3rs - 2005 High Exposure 5-1?
Numb3rs - 2005 High Exposure 5-1 is rated/received certificates of: Netherlands:12 USA:TV-PG
What is 35 - two fifths?
If you meant 35 - 2/5 , the answer is 173/5 or 34.6. If you meant 2/5 OF 35, it is 14
What are the release dates for Exposure - 2000 1-1?
Exposure - 2000 1-1 was released on: USA: 5 April 2000
