Want this question answered?
The glass temperature transition is for glass, polymers, etc. (amorphous or semicrystalline materials), but not for leather.
At the transition temperature, the heat goes into causing the change in state. Once the change in state is complete, the temperature will change.
The -125 degrees indicate the transition temperature of Polyethylene from glass.
Depending on the polymerization, the glass transition temperature will be between -13 C and -8 C; that's 8.6 F to 17.6 F.
Alcohol affects the permeability of the cell membranes. It would have the most vigorous effect.
the variton of transition temperature with respect to mass of iostopic electrons
== ==
The glass temperature transition is for glass, polymers, etc. (amorphous or semicrystalline materials), but not for leather.
Metals from the d-block (by opposition with the inner transition metals).
At the transition temperature, the heat goes into causing the change in state. Once the change in state is complete, the temperature will change.
Tm is temperature of melting. Tg is glass transition temperature.
The glass transition is a second order phase transition. For materials that have a glass transition temperature, below it they are hard and brittle and above it they are softer and "rubbery".
It doesn't have
is the temperature at which fluid structures crystallize before being solid
It varies. Firstly, it's only present in ferrittic steels like carbon steel, not in most kinds of stainless. Secondly, it depends on the grain size of the steel microstructure, with smaller grains giving a lower transition temperature. The third factor is alloying elements. Silicone and Nickel content tends to raise transition temperature. With modern steels the transition temperature is about -60 degrees celcius. Older steels may have a transition temperature at room temperature, or, more often, at 0 or -10 degrees.
Mercury
1257 degrees F.