The old UK colouring (still found in old installations) was black = neutral, red = positive, green = earth. The new colouring is blue = neutral, brown = positive, yellow and green stripes = earth.
With the new colours: on a UK 3 pin plug when facing the contact screws on the back with the cover removed: blue goes to the left contact as there is an 'L' in blue, and Brown is to the right contact as there is an 'R' in brown.
Black red and yellow is three-phase. there is no neutral.
208/120 is typical for the US, so these are the colors for the US: A phase: black -------------------In Canada; A phase - Red B phase: red-------------------------------------B phase - Black C phase: blue -----------------------------------C phase - Blue neutral: white -----------------------------------neutral: white ground: green or green with yellow stripe
Black & Red are hot, and White is neutral. If it has no place to connect neutral connect neutral to ground.
The new cooktop has a 4 wire connection. Red & Black are hot. White is neutral, and green is ground. You existing panel is wired with 3 wires. Black & Red are hot and green is ground. There is no neutral wire. Connect the black to black, red to red, and then connect the white and ground together at the plug.
The red and black wires are Line wires in a 3 wire service and includes a common (neutral) wire.
Black red and yellow is three-phase. there is no neutral.
the thermostat has a black(line) wire to it, and a red wire going to it. the red wire then connects to the neutral wire. the black and red are like a leg switch.
In residential wiring the white wire is neutral on the 120 volt circuits. On a 3way circuit the red is the traveler and the white is neutral. On a 240 volt 3 wire connection the white & black are hot. On a 240 volt 4 wire connection the black and red are hot and the white is neutral.
If this is a home wiring question and the wires are black and white then black is Hot and white is Neutral. If you also have a red wire, it is the other hot wire, and either the black or the red wire to the white one would be 120 volts, and red to black would be 240 volts.
208/120 is typical for the US, so these are the colors for the US: A phase: black -------------------In Canada; A phase - Red B phase: red-------------------------------------B phase - Black C phase: blue -----------------------------------C phase - Blue neutral: white -----------------------------------neutral: white ground: green or green with yellow stripe
red is positive and black is neutral...if the wires are red and black.
Black & Red are hot, and White is neutral. If it has no place to connect neutral connect neutral to ground.
Red - active, (commonly known as your live cable) Black - Neutral Green - Earth
The new cooktop has a 4 wire connection. Red & Black are hot. White is neutral, and green is ground. You existing panel is wired with 3 wires. Black & Red are hot and green is ground. There is no neutral wire. Connect the black to black, red to red, and then connect the white and ground together at the plug.
The red and black wires are Line wires in a 3 wire service and includes a common (neutral) wire.
Sounds like it is a 220-240 Volt hot water heater. The black and red are connected to the 220 volts supply and the white is connected to Neutral. At the breaker panel red and black connect to the 2-pole 220 volt breaker and white goes to the neutral bus bar.
red = phase, black = neutral, green = earth