0
What else can I help you with?
What is pH of?
pH is a potential, with no unit, it has no input and no output.
How do you simulate a pH probe output signal?
Try a transmation unit, I would assume that the pH probe puts out either a 0 - 10 Vdc, 4 - 20mA signal. Set the Xmation unit to the similar and connect its output where the pH probe is sending its signal.
How do you find the value of M and C in this equation?
Question.A chemist measures the output, E (mV), from a pH electrode for different values of pH.When pH = 6.0, the voltage, E = -60 mV, andwhen pH = 8.5, the voltage, E = 90 mV.i) Find the values of m and c, assuming an equation of the form:E = m × pH + cThanks
What is the equation for calculating 3-phase full wave rectifier voltage?
Following is the Voltage calculation for a 3 Phase Full wave rectifier bridge circuit with 6 diodes: Vac rms (Ph-Ph input) = 2pi / 3√2 x Vdc (output) Vac rms (Ph-Ph input) = 0.74 x Vdc (output) Hope that helps :) Regards, Syed
What is the most acidic pH 10 pH 3 pH 2 pH 6 pH 8 pH 12 pH 1 pH 75?
pH 1 is the most acidic, as it is closest to 0 on the pH scale. Lower pH values indicate higher acidity.
What solutions is the weakest acid pH of 2.4 pH of 5.2 pH of 6.4 pH of 8.6 or pH of 10.1?
pH=6,4
Do you use pH or PH?
neither pH
Are speakers an input are output device?
Output.
How you can test the pH of solution?
You can test the pH of a solution using pH strips, pH meters, or pH indicator solutions. With pH strips, you simply dip the strip into the solution and compare the color change to a pH color chart. pH meters provide a digital pH value by immersing the electrode into the solution. pH indicator solutions change color based on the pH of the solution, allowing for a visual estimation of pH.
How do we find out the pH?
The pH is determined with a pH-meter.
How do you measure pH accurately in a solution?
To measure pH accurately in a solution, you can use a pH meter or pH strips. A pH meter provides a digital reading of the pH level, while pH strips change color based on the pH level of the solution. Simply dip the pH meter probe or pH strip into the solution and read the pH value indicated.
Which ranges on the pH scale are acidic basic and neutral?
pH 0 < acidic < pH 7 neutral = pH 7 pH 7 < basic < pH 14
