Planning is similar in all applications. That's when you decide how and what to do and in which order.
I assume you mean PLANING. That's the process of making a surface flat.
The adaptive control is basically a feedback system that treats CNC as an internal unit in which the machining variables automatically adapt themselves to the actual conditions of the machining process.
No you csn't machine the material which are non conductive by using edm.But there is a drived machining process which is used for machining non-conducting material(like ceramics, brittle materials) is ECDM(Electro Chemical Discharge Machining).
Machining usually refers to performing a mechanical process on a workpiece of any material that changes its physical properties in some way. More commonly it means to use machine tools to shape a workpiece with cutting action.
water jet machining process check out http://engineersguide.in/mech1.html
The waste, and amount of waste, from a machining process depends entirely on the material being machine and the specific process. The only "waste" produced in every machining process is heat in some form or another. For a typical metal cutting operation you're going to have smaller bits of metal removed from a larger workpiece called "chips". There may also be cutting fluids consisting of heavy mineral oils and/or emulsified oils that break down with time and require disposal at a recycling center.
Machining process is a broad term that refers to the cutting processes, abrasive processes and the non-traditional machining processes.
a machining process carried out on a workpiece with constant cross-section.
objectives of magneto abrasive flow machining
forcing abrasives over work piece at higher speed for cutting . it is unconventional machining process .
Annealing.
The adaptive control is basically a feedback system that treats CNC as an internal unit in which the machining variables automatically adapt themselves to the actual conditions of the machining process.
In ordinary machining we use harder tool to work on workpiece , this limitation is overcome by unconventional machining. unconventional machining is directly using some sort of indirect energy for machining. Example : sparks, lasers, heat , chemicals etc.. applied in EDM ,laser cutting machines...etc
SEE; poke-yoke (error proofing) process capability statistical process control
Transforming a vector without using a computer chip.
Proof machining means>> If part have too much dispensable material to remove through out machining than machining is done on the same to remove all material till it will have only 2~3 mm to achieve its final dimensions , this process is called proof machining or if part have 1~2 mm material to remove for coming it final dimensions then Cutting tool path proving done & is called proof machining.
conventional machining is that in which the control of removal of material is either by automatic machines or by man handled.while cnc machinig is that in which control of machining process is done by computes or through programming.
Lapping is a type of process in machining. In this process, an abrasive is placed between two surfaces that are rubbed together by a machine or human.