You would no longer be able to see through it.
If the image is erect and equal in size and it does not change its size and nature on moving the mirror closer or away from the object, the mirror is plane mirror. If the image is erect and magnified and it becomes inverted on moving the mirror away from the object, the mirror is concave mirror. If the image is erect and diminished and remains erect on moving the mirror away from the object, the mirror is convex mirror.
A Mirror Character is a character made from a mirror.
The mirror in the mirror was created in 1984.
A concave mirror, or converging mirror, has a reflecting surface that bulges inward (away from the incident light). A convex mirror, fish eye mirror or diverging mirror, is a curved mirror in which the reflective surface bulges toward the light source.
Typically the mirror is clipped onto a flat plate behind it. Use a glass fixers sucker or a few small hooks around the edge and pull the mirror away from the plate.
There is a triangular plastic plate on the inside of the car door that covers up the mounting screws for the mirror. You need to get the plate off first. I did this on my '92 passenger side and was unable to get the plate off without breaking it). Once the plate is off there are 3 screws that hold the mirror to the door. Take them out, change mirror, put them back in.
first u have to put a toast on a plate, place the plate on a roof, get a mirror and make the mirror reflect to the sun to make the toast
Yes, A shiny metal plate is also said to be a mirror because reflection occurs when light rays strike a shiny surface or a mirror. By: Aisha Ijaz
yes or no
there should be a screw on the mounting plate for your mirror. most of then are a hex head bolt the just holds the mirror to the mounting plate. look at where the mirror connects to the windshield, that's where the bolt should be.
A mirror is formed by a glass plate with a reflective coating behind it. A mirror reflects the right that hits it, thereby forming an image of what is in front of the mirror.
Get some rear view mirror glue from target and glue the plate to the window. Make sure the tapered edge tapers into the window. If you glue it on wrong you can always buy another plate and glue that to the first but you will feel pretty stupid. Then slide the mirror on the plate.
You can find a backing plate for your 1998 Honda Accord passenger side mirror at most auto-parts stores. You can also find the backing plate at your local Honda dealership.
If you still have the backing plate available you can use it RTV silicone adhesive to mount the glass to the backing plate. If you have not yet purchased the mirror glass we do have them available for $19.99 shipped and they include adhesive mounting tabs designed specifically for mounting glass to the backing plate. Thanks Jack
drill screw head out with 1/4 " drillbit mirror mounting plate can be removed by removing door panel. replace with new monting plate if threads are stripped in mounting plate. just did this myself
To replace the exterior mirror on a 1996 Beretta, find a small plate on the inside of your door. Remove the screws and install the new mirror.