drill screw head out with 1/4 " drillbit mirror mounting plate can be removed by removing door panel. replace with new monting plate if threads are stripped in mounting plate. just did this myself
remove door panel then remove screws behind mirror. remove door panel then remove screws behind mirror.
To install the Mitsubishi Eclipse driver mirror, you will need to remove the interior door panel on the driver's side. Then, remove the cover for the mirror screws. Remove the screws and wiring and remove the old mirror. Replace the wiring and screws as you add the new mirror to the car. Then place the cover and the door panel back on the vehicle.
there will be a panel on the inside of the door, it might have some hidden screws. Remove this and you should see some nuts or screws holding the mirror on, remove these and the mirror should fall off.
Remove the clear lenses from the overhead lights near rearview mirror. Use a torx driver to remove two small screws holding bezel in place. Remove bezel. Now you can access the the two torx screws holding mirror.
Remove speaker grill, remove screw holding speaker, screws to the mirror are behind speaker
A Honda Civic rear view mirror is held in place by screws. To see the screws remove the plastic cover. Loosen all the screws and the mirror will drop down. Replace with a new unit.
To remove the door panels in a 1987 Ford Ranger, simply crank the cover on the door to pry it open. Then remove the head screws inside and take off the other three screws.
If you have an electric side mirror you have to remove the door panel then unplug the electrical connector and then remove the screws that hold the mirror.
To replace the driver's side mirror on the 2003 GMC Envoy, first remove the interior door panel. Then, remove the mirror connection cover inside the panel as well. Unscrew the screws holding the mirror to the door. Remove the wiring and replace the mirror with a new mirror. Replace the screws and place the door panel back onto the door.
The passenger side mirror on a 2001 Toyota Sienna is mounted by screws. To replace the mirror remove the mounting screws and unplug the wire clip.
The side view mirror on a 1995 Chevy Corsica is mounted by screws. Remove the screws and panel for the mirror on the inside of the vehicle. Pull and replace the unit.
Passenger mirror access is same as drivers side. Three screws accessible inside door panel to remove entire mirror assembly. To remove mirror within the mirror assembly it just pulls off - snap fit of mirror mount to drive.