Its an air collecting box. And it is used for clubbing two units together or reducing the sound level of air flow
Eng'r. Mostafa Al Wakeel
Plenum boxes are often the most effective way of connecting terminals to ducting, and with the superb range available from HVC, why not find out more about our plenum boxes?
Plenum boxes provide the connection between grilles and diffusers, and the appropriate ductwork either extracting or supplying air. Essentially plenum boxes are just as important as both the grille and ducting.
Fixing lugs for fitting into a drop rod ceiling can be factory fitted, and normally the plenum will be fixed by an appropriate method to the grille or diffuser neck.
plenum chamber An enclosed space in which a plenum condition exists; air is forced into it for slow distribution through ducts.
Please give the exact method of sizing a plenum box
The Trox plenum box radial air discharge ensure a high degree of comfort.
The exact method of sizing a plenum box is putting the numbers in their tens.
The large plastic box on top with the air filter in it could be called a plenum.The large plastic box on top with the air filter in it could be called a plenum.
refer to TROX
Heater plenum is the same as the heater box and it spans the width of the passenger side dash behind the glove box. Check heatertreater.net for pictures.
It is mounted on the Plenum.
Here in Louisville, KY General purpose runs for about 75$ a box and Plenum is $250.
The BDA is mounted to the top of the plenum between the plenum and the duct work just behind the glove box
If it is a tuned port injected motor, it is under the plenum. The plenum is the big grey aluminum box with 8 funny looking pipes, called runners, connected to it.
It sets on top of the fire box and the plenum set on top of that
All " Mass Airflow" sensors are on the same place. It is on the air intake hose of the plenum. Some are up against the plenum and some are next to the air filter box.