It will all just turn off. Because with a series circuit the power travels through each light bulb in a series (one after another) so if it is interrupted by there being a burned out or removed bulb, the circuit will not be complete and thus not work at all. If you want to see for yourself, most Christmas lights are series circuits, go ahead and take one out.
The bulb is dim.Because,the voltage is drops in series connection so you add more bulbs in series the last bulb got low voltage that reason for the bulb is dim
it is because the energy flows through the switch and it makes the light bulb turn on and if the switch is open the energy will not flow it will stay in the place the switch begins
Answer: it will burn out **Explain:**The same current flows through each part of a series circuit. If the circuit is broken at any point there won't be any current that will flow. In this case, if one of the bulbs blew out, the other bulb would not be able to light up because the flow of electric current would have been interrupted. #Carryonlearning
If the current is stronger then the bulb will be brighter.The reading is much easier when you sit under the brighter bulb.
If one light bulb in a series circuit fails, all the other light bulbs will go out, until the failed bulb is replaced and the series circuit is completed again.If one light bulb in a parallel circuit fails, all the other light bulbs will still work.
A series connection will not work if one bulb fuses but in a parallel connection if one bulb fuses the rest will stay lit.
The bulb is dim.Because,the voltage is drops in series connection so you add more bulbs in series the last bulb got low voltage that reason for the bulb is dim
To replace most front lightbulbs on 7 series, bumper has to be removed.
Yes. A typical light bulb socket is an open circuit when the bulb is removed, thus blocking the flow of current and turning off the remaining bulb. The removed bulb would go out too, of course. It is possible to imagine a bulb socket that reverts to a closed circuit when the bulb is removed. In that case, the remaining bulb would remain lit.
how does electric current flow in the b connection? do the two bulbs in a series circuit, light when the middle bulb is loose? why?
The circuit will be interrupted. There will be no closed path through which the current can flow.
That's a serial connection.
Remove a light bulb. If they all go out, it is series, if the all stay on, it is parallel.
yes we can bulb placed in series with dc
You have to remove front headlight piece (which is held by two screws). Once removed you will be able to see and reach the bulb connection on the back of the side marker. Hope this helps.....
EASY.The removed light bulb does not have any connection to the other light bulbs. While it's socket that was holding the lght bulb has power running through it to the other bulbs also.
parallel circuit: Providing that the breakage does not result in a short circuit the other bulbs will still light. series circuit: If the breakage results in a short circuit through the bulb the other bulbs will light more brightly. If the breakage results in a breakage of the connection through the bulb then the other bulbs will not light.