park,reverse,neutral,drive,low2,and low1
Frozen/seized clutch pack, time for a rebuild.
Put it in neutral and push it in reverse for about 500 feet it should kick out.
Stop the vehicle, put it in neutral, depress the clutch (if a manual transmission), pull the transfer case lever back one position from the 2HI position.
We need to know which indicator light you speak of.
Your 2004 Chevrolet trail blazer and battery light indicator is always on because the battery has sufficient charge.
Where is the crank position sensor hole on a 2003 Blazer
The indicator bulb may be burned out.
On my 2002 S-10 truck, the neutral safety switch (also called the Park Neutral Position Switch, or PNP switch) is located on the driver's side of the transmission. It is a black box that has 2 electrical connections going into it. There is a very good chance that it is in the same location on your 2000 Blazer. Hope this helps.
i have a 92 s-10 blazer and it has no reverse Andy ideas?. it will go in to drive and shift in to all the gears..but will no go into reverse? can u help me
To override a neutral safety switch, locate it (it should be at the base of the steering column) and remove the green and brown wire. Connecting these two wires together will bypass the safety switch and your reverse lights will turn on.
Nobody knows, not even GM !
Check to see that transmission linkage not making contact with wiring while gear selector in forward position.