it is so that your car doesn't blow up
Keeps oil in the engine where a part has to pass through
To pump oil around the engine where it is needed.
Oil additives are something I do not recommend you use. The purpose of these additives is to rid you of your money while doing nothing for your engine.
The purpose of the oil pan is to allow oil to rest in the pan when the engine is not running. This is where the oil collects and also where you will drain the oil for an oil change-with the oil drain plug. Hope that helped.
The oil pressure sensor sends a reading to the gauge so you can moniter the engine's oil pressure. No oil pressure means the engine is in big trouble.
Those lines are what oil flows through so it can get to the oil cooler and cool the engine oil down, It helps the life of the engine.
lubricates the crankshaft and pistons
Not far, anyway. The engine flush is not engine oil ... its only purpose is to, hopefully, clean the inside of the engine areas. That's why it's called "Engine Flush" and not "Engine Oil". Get it out and put the new oil in soon.
buat lar bodoh!
The purpose of lubricating oil is to carry away any impurities, such as filings ground off of moving metal parts, because they will harm the engine. When there are a lot of filings floating in the oil, it is not good for its purpose and should be replaced (changed).
For the operator to monitor the oil pressure of the engine. If the oil pressure drops below average when running, the engine is in trouble.
to let the driver know how mush pressure the oil pump is pumping.without the right pressure of oil getting to the engine could result in major engine damage or failure