0
1655 f this is the correct code for you're radio all you need to do is push those buttons on radio to turn on. If not, do not enter no more than 3 times or you will be locked out. If you are the owner take proof of ownership to dealer parts dept. with vin. # and most of the time they will give it to you. Call you're dealer first to be sure what requirements they may need. Hopes this helps. J. C.
Wiki User
∙ 10y ago
Add your answer:
Earn +20 pts
Reset the CD player in 1998 Volvo S70?
The reset code is on the back of the radio,
Radio reads off on 2000 s70 Volvo?
Leave the radio turned on in this condition for several hours. Then enter a proper security code for your radio. If you don't have the code, you will need to contact a Volvo dealer.
What is the anti-theft radio code for a 1998 Volvo S70?
You have to call a Volvo dealership and give them your VIN number. Or go through their website.
How do you reset the radio in a 1999 s70 Volvo after you change the battery?
go to dealer ask them 4 code pass
Will the doors for a 1998 Volvo S70 fit a 2000 Volvo S70?
Yes, they will.
What if the 1999 Volvo s70 does not ask for radio code?
You have to put the key in accessory 1 position for 2 hours and the code will show up on the display. Enter the code via the push-buttons below the display, your done.
How to replace headlight switch in Volvo s70?
1998 VOLVO S70 Headlamp Switch
How do you replace the alternator on a 1998 Volvo S70?
were should i satart when replacing the alternator in a Volvo s70 1998 were should i satart when replacing the alternator in a Volvo s70 1998
What is the wheel bolt pattern to a 1998 Volvo S70?
what is the bolt patern for a s70 Volvo 98
Where is1998 Volvo s70 t5 thermostat location?
how to replace the thermostat on a 1999 Volvo s70
Is there a repair manual available for Volvo S70?
Chilton or Haynes should have a repair manual for the Volvo S70.
What does code p1021 mean for your 99 vovlo s70?
The code P021 on a 99 Volvo s70 means that you need to check the ETM. This is the Electronic Throttle Management sensor which probably needs to be replaced.
