The "-s" switch in the format command is used to format the disk so that it is a "system" disk. In other words, it makes it a "bootable" disk.
s switch stores the system file on a disk after formatting. v switch allows to enter a volume label once when formatting several disks.
The /S switch stores the system files on the disk after formatting. Writes the two hidden files and Command.com to the disk, making the disk bootable. Not available under Windows 2000/XP or Windows ME. The /V switch allows you to enter a volume label only once when formatting several disks. The same volume label is used for all disks. A volume label appears at the top of the directory list to help you identify the disk. The /Q switch re-creates the root directory and FATs if you want to quickly format a previously formatted dist that is in good condition. /Q does not read or write to any other part of the disk. Comp TIA A+ Guide to managing and maintaining your PC, 6th Edition, Chapter 15, page 764. The /S switch stores the system files on the disk after formatting. Writes the two hidden files and Command.com to the disk, making the disk bootable. Not available under Windows 2000/XP or Windows ME. The /V switch allows you to enter a volume label only once when formatting several disks. The same volume label is used for all disks. A volume label appears at the top of the directory list to help you identify the disk. The /Q switch re-creates the root directory and FATs if you want to quickly format a previously formatted dist that is in good condition. /Q does not read or write to any other part of the disk. Comp TIA A+ Guide to managing and maintaining your PC, 6th Edition, Chapter 15, page 764.
Format any disk with "format /s" option will make it bootable..
Windows 98 startup disk has some useful utilities and can be used to repair Windows 98 without any additional drives. A floppy which was created by format A s, just have loader, and couple system files to be able to boot MSDOS.
format B: /s
Assuming you're talking about making a bootable floppy disk... You need to format the disk with the /s switch... For example - Format A: /sOnce the disk has formatted - you need to copy the system files (config.sys, config.bat & autoexec.bat) to the disk.This creates the bare minimum files needed to boot a computer from a floppy - and give you the command prompt. There are other files you can add to the disk (such as what the command prompt will look like etc) - but they're entirely for your own choices.
Format a: /s will format the disk in the first floppy drive and copy the system files to it, making it a bootable disk.
The disk formatted with the s switch applied, would have three extra files on it... Config .sys - Config .bat and Autoexec .bat... These files tell a computer the disk is capable of booting the computer - not just for storing data.
If you have a PC running Windows XP or 98 have a look at the following link: http://www.bootdisk.com/pendrive.htm I have had sucess with method 2 and 4. If you need to format the USB flash drive from a PC running DOS I can not help.
Disk Management allows you to partition and format disk space from within windows Jimmy S
FORMAT A: /S or SYS A: Note: Are you a time-traveller from the 90s?
there were less directories