It's bronze
Brass
It's bronze
You can replace the inside drivers door handle by removing the door panel. With the door panel removed the door handle mechanism will be visible. Remove the linkage from the door handle. Remove the door handle retaining bolts. Reverse the process to install the new door handle.
Remove the door trim panel. Remove the inside door handle rod. Remove the inside door handle retaining rivets. Remove the inside door handle from the door by sliding the handle rearward.
Remove the inside door panel. Remove the door handle linkage. Remove the door handle retaining bolts. The front door handle will come off.
Remove the inside door panel of your 1987 Chevy. Remove the linkage from the door handle. Remove the door handle retaining bolts. The door handle will come off.
Inside door handle or outside door handle?
You must replace the handle, they are made of plastic. For the inner- remove both screws in the door panel[in the grab handle] remove the trim from the door handle. Remove window crank and with proper tool remove door panel. Tool is cheap. With panel off, there will be one rivet holding old door handle in place. Drill out rivet [ 3/16 ] and slide whole door handle assembly forward. Carefully remove door and lock rods and reverse the process to assemble. Outer- One bolt is behind door panel and the other is on the outside edge of the door right behind the handle. Simply remove bolts, remove handle and swap door lock into new handle and replace.
Inside handle, outside handle, sliding door handle?
An electric door handle can be opened with the push of a button or a sensor, while a traditional door handle requires physical turning or pulling to open the door.
To operate a pull-down door handle, simply grasp the handle with your hand and pull it downwards to open the door. Release the handle to close the door.
Yes, the door handle is loose on one side of the door.