0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
How do you break a vacuum seal created by putting a glass lid on a hot metal pot of food?
Heat up the pot again until the vapor pressure of the liquid inside reaches the pressure of the atmosphere - or at least close enough that you can dislodge the lid.
Does a seal makes high pitch or low pitch sound?
High
What are the limitations of chromatography?
Some drawbacks of gas chromatography include:The samples analysed are limited to those that are volatile or can be made volatile (reaction to form a volatile derivative).The samples must be thermally stable to prevent degradation when heated.Cannot be used to prepare samples for further analysis once separated.Problems can be encountered when injecting the sample:It is difficult to measure and inject such small samples (approx 0.3microlitres) accurately without evapouration of the sample, for example.The rubber seal through which the sample is injected may leak leading to loss of the sample.Small pieces of the rubber septum may be adsorbed onto the column giving 'ghost peaks'.The sample may be injected directly into the heated part of the injector so vapourisation may not occur (and the sample is lost).
What is the smallest seal?
The smallest type of seal is the Baikal seal.
How many types of seals live in Antarctica?
there are 7 species of seal. the harp seal, the bearded seal, the spotted seal the ringed seal aiii nvm
What are seal pots?
Seal pots (sometime called condensate pots) are used to allow a liquid seal between the instrument and flowing gases such as steam. Their function is to keep the liquid level constant in the impulse tubes. For example, in boiler liquid level applications the high pressure (HP) side of a differential pressure transmitter is connected to the vapor space on top of the steam drum. Steam condenses in the chamber or seal pot and fills the impulse line with condensate. The seal pot is located to allow the condensate to drain back to the source thus keeping the liquid level constant.
Have you used Bar's Liquid Copper to seal head gasket?
It won't work. There is entirely too much pressure in the cylinders to seal up a head gasket... but many people have to try it themselves.
What is a tapered pressure plug?
A tapered pressure plug is a type of mechanical fastener that is used to create a tight seal or provide pressure in a specific application. It has a tapered design that allows it to fit securely into a hole or cavity, providing a high-pressure seal or locking mechanism. Tapered pressure plugs are commonly used in industries such as automotive, aerospace, and manufacturing for various sealing and pressure applications.
How do you make a simple hydraulic?
Take a tube, put a piston in it, seal off both ends of the tube, and use a liquid, or gas to put pressure in and remove pressure from the tube. As the fluid or gas goes in the tube, the pressure pushes the piston out. As the pressure is released, the piston can recede.
How do you change high pressure oil pump on 6.0L ford F250?
In most model years, the high pressure oil pump is located under the intake manifold. Therefore, the first step is removing the intake manifold in order to access the pump. Undo the cover bolts and remove the high pressure oil pump, remove and discard all gaskets, seals and O rings. Replace the lower O ring seal, then the high pressure oil pump and bolts. Install the main oil pressure pump O ring seal, then the discharge pipe and bolts. Tighten all bolts to factory specifications. Install a new D ring seal on the discharge pipe and a new gasket on the oil pressure pump cover. Then replace the pressure pump cover and bolts.
What are gates used for?
Gate valves are used for high pressure services. Gate valves may have a union, bolted or screw-in bonnet. Another type of bonnet is a pressure seal bonnet.
What are gate valves used for?
Gate valves are used for high pressure services. Gate valves may have a union, bolted or screw-in bonnet. Another type of bonnet is a pressure seal bonnet.
How do you change high pressure oil seal?
There are several oil seals in most vehicles. We need to know which one and what vehicle. More info please.
What is a pump seal for in-ground pool?
Main reason for pump seal (mechanical seals) in a pool pump any pump for that matter is to contain liquid (water in this case) in the pump and hold prime and pressure. Other reasons, lower friction,reliability it can last for years.
Pressure seal Globe Valve Manufacturer in India?
Specialityvalve is a well known Pressure Seal Globe Valve Manufacturer in India. They are manufactured by the highest-quality materials and under the strict supervision of qualified quality controllers. They are good for high pressure steam, liquid, catalytic reformers, hydrocrackers, and other difficult services are perfect for pressure seal valves. They are highly sealed, as the name implies, and hence leak proof. They offer safe, highly maintained leak-proof designs to a variety of sectors. The body-bonnet joint seal the Pressure seal bonnet and improves as the internal pressure within the valve increases. Industries ● Petrochemical Industry ● Oil and Gas Industry ● Power Industry ● Chemical Industry Advantages ● Good throttling capability ● Better shutoff capability ● Have higher efficiency ● Can be used in high pressure and high temperature ● Safe and leak free Description ● Body materials: Carbon steel( WCB, WCC,WC6,WC9) A105, F304, F316, F304L, F316L, F51, F53, F11, F22. ● Class: 150 – 2500 ● PN25 to PN450 ● Size: 1/2”-48”. ● Ends: Socket weld, butt weld, flanged, threaded. ● Operation: Handwheel operated, gear operated, electric actuated, pneumatic actuated.
How do you break a vacuum seal created by putting a glass lid on a hot metal pot of food?
Heat up the pot again until the vapor pressure of the liquid inside reaches the pressure of the atmosphere - or at least close enough that you can dislodge the lid.
How does a thermal expansion valve work?
If you are talking about a temperature and pressure valve on a water heater (pop off valve). It is controlled by spring pressure and a rubber seal. As pressure in the tank increases the tension exerted by the spring on the rubber seal is over come until the point at which excess pressure is released around the rubber seal. When the pressure inside the tank decreases the spring again pushes the rubber seal closed. Temperature of the water in the tank is directly related to the pressure.. higher temperature = more pressure.
