It's an electrical generator converting mechanical power into electrical power. The electrical power comes out in the form of single-phase alternating current.
An auto transformer can be either single phase or three phase.
Terminology gets misapplied but a 3-phase converter produces a 3 phase supply from a single phase supply. The only proviso is that generator, converter and motor are all suitably rated and compatible.
one ton
You can take three separate single-phase circuits from a 3-ph generator. Just use one of the live wires plus the neutral to make a single-phase supply. <<>> A three phase generator does not have to be converted to single phase. In electrical terminology any two legs from a three phase system are classed as single phase. No matter what voltage the generator is producing, L1 - L2, L2 - L3, L3 - L1 are classed as single phase legs along with L1 - N, L2 - N, L3 - N. If the generator output voltage is not the voltage that you are looking for use any two legs of the generators output voltage and use a transformer to obtain the voltage that you need.
If the generator is a 12 lead reconnectable, you can use something called a zig-zag connection.Check the link below. It is an installation manual for a Marathon generator. Zig-zag connections are shown on page 8. For a home, you would use the low zig-zag connection for 120/240V (in the US). One caveat: you can only load a zig-zag single-phase connected generator to a maximum of 66% of its rated load. So, a 15kW 3-phase generator would only provide 10kW single-phase power. If this doesn't quite make sense, hire a pro!IF YOU ARE NOT ALREADY SURE YOU CAN DO THIS JOBSAFELY AND COMPETENTLYREFER THIS WORK TO QUALIFIED PROFESSIONALS. If you do this work yourself, always turn off the power at the breaker box/fuse panel BEFORE you attempt to do any work AND always use a meter or voltage indicatorto insure the circuit is, in fact, de-energized.
capacitor start motor
how reversing an ac single phase induction motor to wark as induction generator
To answer this question a voltage must be given to find the current output. Also whether the generator is three phase or single phase.
We can convert a 3 phase ac motor into generator by changing phase sequence of the ac input cable of that motor
If the elevator has a single-phase motor, the diesel generator can also be single phase provided the voltage and VA ratings are compatible.
In Europe they have both single phase and three phase.
There is no such thing as a two phase load any more. Any two legs from a three phase system are classed as single phase. If this single phase load is connected across the generator it will induce an imbalance in the output voltages of the generator. This is one reason that single phase loads on a three phase generator should be shifted around to find the best possible balance.
The type of backup generator should match the type of utility service you receive. If your utility power is single-phase (almost all residences in the US are), then yes, your generator should be single-phase as well.
Terminology gets misapplied but a 3-phase converter produces a 3 phase supply from a single phase supply. The only proviso is that generator, converter and motor are all suitably rated and compatible.
Any single-phase a.c. generator producing more than 2.5 HP or 2 kW - at the required voltage.
yes we can by using one phase and neutral line
"2 phase" and "3 phase" are descriptions of AC supplies, which no DC generator can imitate, regardless of its power rating.
No, you can not get three phase power from a single phase generator no matter what internal connections you use. On the other hand you can obtain a single phase supply from a three phase generator by using any two phase legs as a source. <<>> I single phase generator can produce three phase by using a converter but its not efficient and does not work very well. <<>> Well there is an another way too. but one has to be precautious in that...simply short the three phases of the electricity supply n feed them with a single phase of the generator...now when the mains is bak make sure the short phases are separated again and then powered up otherwise you will be hearin blasts here n there...use ATS for automatic switching that gives you automatic transfer and can be programmed when to short and when not to..