A board foot is one square foot by one inch thick or 4 quarters (4/4). If you were using something thicker, then the square footage provided would be proportionately less. I.e. 8/4 lumber would yield half the square footage but would be twice as thick (2"). So, using 4/4 lumber would mean 2000 board feet for the house assuming no waste.
The question you are asking cannot be answered with the supplied information. (And It reminds me of the riddle "which is heavier, a ton of bricks, or a ton of feathers?") Cubic feet is a measure of area, while square feet is a measure of volume. Area is calculated (in the case of a rectangle) using the equation Area = Length x Width Volume is calculated using the equation Volume = Length x Width x Height or simply Volume = Area x Height. Lets say you were working with concrete slabs (foundations). You want to build a garage that is 15ft wide, and 30 feet long. To calculate the square feet you would multiply the two, with a product (result) of 450 square feet. To find out how many cubic feet your slab is, you'dneed to know how thick it is. If the thickness is 8" you'd have the following equation. 450 square feet x 8/12 foot = 300 cubic feet. If the thickness is 1 foot you'd have 450 cubic feet. ( 450 Sq. ft x 1 ft = 450 Cu. ft) If the thickness is 16" you'd have 450 square feet x 16/12 feet = 600 cubic feet. You should get the point now. Distance is linear feet, area is square feet, and volume is cubic feet. They all measure different things, and require something to calculate the next. You cannot calculate the area of a room from its length (without measuring the width), in the same sense that you cannot calculate the amount of air in a room without measuring the height of the ceiling.
2.81 gallons for every 1/100 of an inch thick. Most paints are applied at 4 mils wet, so they usually cover about 400 square foot per gallon. So you'd need about a gallon and a quart to cover 450 square feet.
how much does 3/8 clear annealed glass cost per square foot wholesale
Buddy Holly.
11 x 8 = 88 square feet
The dimensions are: Length = 18 feet Width = 11 feet Height = 8 feet
10 feet 11 inches is 3.33m
It is: 7 yards and 2 feet
3 feet 9 inches.
64 square feet
It is: 8*8*7 = 448 cubic feet
There are 12 inches in one foot. Therefore, 107 inches is equal to 107/12 = 8.916 recurring (that is, 8.916666...) feet or 8 feet 11 inches.107 / 12 = 8.916666666 feet = 8 feet 11 inches.
8 feet square is the same as 8 square feet. NOT!8 foot square is 8' x 8' or 64 square feet.
There are 12 inches in one foot. There are 2.54 centimetres in one inch. Therefore, 11 feet 8 inches is equal to (11 x 12 x 2.54) + (8 x 2.54) = 355.6 centimetres.
17.45 feet.
140 Inches is about 11 Feet, 8 Inches. 12 Inches = 1 Foot 140 Inches / 12 Inches = 11 Feet and 2/3 Of a Foot 2/3 Of a Foot = 8 Inches 1 inche = 2.54 cm 140 inches = 355.6 cm