That depends on the stain. Read the stain label and it will give you an idea.
1000 square feet/9 = 111.1 square yards of concrete 6 inches thick. This is the same as 111.1/4.5 = 24.7 cubic yards of concrete.
24
That is like asking how many yards in a gallon. There are no square meters in a meter, and no meters in a square meter.
you will need 5 cans of paint.
1 gallon of paint to cover about 350 square feet You need slightly more than a gallon if the walls are unpainted drywall, which absorbs more of the paint
form_title= Concrete Stain form_header= Keep your home beautiful with a concrete stain. What is the square footage of the area?*= _ [50] Do you need someone to install the concrete stain?*= () Yes () No What type of concrete stain do you want?*= _ [50]
it all depends on the paint, coverage will be printed on the rear label of the can
1:2:3 ratio of concrete How maney sq.ft will come
A yard of concrete is a cubic yard and cannot be converted directly to square feet of coverage. You must first determine the depth or thickness that the concrete will be. For instance, since 1 cubic yard equals 27 cubic feet, a 1 foot thick layer of concrete will cover 9 square yards of area. A 4 inch (1/3 foot) thick layer would cover 27 square feet of area.
300 - 400 square feet per gallon. Contact us via our website if you need more information - its listed below under "related links"
Paint coverage differs depending on brand and type of paint. Most (if not all) paint cans will indicate that one gallon covers so many square feet. For example, Paint A says one gallon covers 200 square feet. That means 200 square feet will require one gallon, 50 square feet will require one quart, 400 square feet will require two gallons, etc.
how much does concrete cost per square foot
Premixed concrete and cement is usually ordered in quantities referred to as yards. A yard is basically a cubic yard of volume, a three dimensional square box that is 3' x 3' x 3', or 27 square feet. If an area to be poured requires the coverage of 27 square feet with a thickness of 4", then the amount of concrete required would be 1/3 yard.
1 cubic yard covers 324 square feet per inch of thickness, divide 324 by thickness in inches to get coverage, i.e. 4 inches thick would cover 324/4=81 square feet, 36 inches thick would cover (you guessed it) 9 square feet.
The land coverage of Cameroon is approximately 475,440 square kilometers.
That would depend on the type of paint you want to use. Usually, the area coverage will be written on the label of the paint can. Approx. 400 sq feet is the coverage on a smooth surface using regular house paint, however, an elastomeric paint would only go approx 80 sq ft per gallon.
The standard coverage for a gallon of interior paint, applied in a single coat, over a sealed or primed wall in good condition is approximately 400 square feet. Under similar circumstances a half gallon should cover approximately 200 square feet.