using those dimensions, 38.89 cubic feet not square feet
Yes. As long as it meets the required distance from the floor and the minimum square footage opening. Example - where I am the opening must be 5.7 square feet or larger.
It depends on the thickness and the density. One ton should be about 15 cubic feet when compacted, so it would cover 30 square feet 6 inches thick or 45 square feet 4 inches thick or 60 square feet 3 inches thick. It would make a driveway four inches thick, 9 feet wide and 5 feet long or a footpath 3 inches thick, three feet wide and 20 feet long.
It depends on the mass of the project and where it's located. For Instance if your planning on constructing a residence x amount square footage on the dark side of the moon. So you get the idea.
Not square yards, but Approx. 5.24 cubic yards 54'2" = 650" x 7'10" = 94" x 4" = 4" = 244,400 cubic inches / 46,656 cubic inches = 1 cubic yard (36" x 36" x 36")= 5.24 cubic yards
Yes, temporarily. In the long run it's more efficient to get the pipe glue relevant to that pipe,
The square footage of a rectangle with dimensions 233 inches by 144 inches is 223 ft2.
The square footage, as in the area? Roughly 183.1 sq. ft.
You multiply the length by the height and divide by the number of square inches in a square foot. . . . . . . . . . . . . . 215 * 96 / 144 = 143 1/3
Start by converting the feet to inches. So you have 247 inches by 233 which gives you 57,551 square inches. Divide by 144, the number of square inches in one square foot. The answer will come out to be 399.66 or 400 square feet.
The formula for calculating square footage is a=S2 (a = area and s = side) Example, to calculate the square footage of a room that is 15 feet wide and 12 long, you would multiply 15 x 12, which will give you the square footage.
These dimensions are the same as 10' x 4', so the answer is 40 sq ft.
Convert both measures into feet.Multiply these together.
If a square has an area of 86 square inches, each side is about 9.273 inches long.
That doesn't sound right. As written, that's less than one square foot. Even 11.6 by 10.6 feet probably isn't correct. I'm going to guess 11 feet, 6 inches by 10 feet, 6 inches which comes out to 120.75 square feet.
11 x 13 = 143 square feet
330 square feet
40inch = 3.33 foot 48 inch = 4 foot so 4 x 4 x 3.33 = 53.328 or 53 and a third cubic feet - as you have three measurements it needs to be in cubic feet either that or the pallet square footage is based only on 40 x 48 3.33 x 4 = 13.32 square feet