star delta connection is used reduce high starting current of the motor.
you can see the below diagram
if you need anything more details... let me know
i think its use for 3 phase connection.
6
the speed decrease if increasing load..in star connection the speed lower
The power of all three phases can be transmitted on three conductors.A star connection, as opposed to a delta, provides a grounding reference. Also, for ground faults on the secondary (assuming no delta third winding, or source third winding) will be a direct ratio similar to phase faults, instead of 57%. Another reason is to avoid the inherent phase shift involved in a delta/star configured transformer.Another AnswerA 'star-connected' secondary is the standard European connection for a three-phase distribution transformer, as it provides a line voltage of 400 V together with a phase voltage (i.e. line to neutral) of 230 V.
in order to reduce the impact of fault current...
T=I A(alpha) , T = I * DALTA W (OMEGA)/DALTA T , SINCE I*W (OMEGA) = DALTA L(ANGLUAR MOMENTUM ) So, T = DALTA L / DALTA T , Thus , As rate of change of anguar momentum is equal to torque . so we know that earth revolves around sun while torque acting on it is zero . so here we may conclude that T=DALTA L / DALTA T , T= O => np change in DALTA L i.e DALTA L = CONSTANT . so now we may conclude that when earth revolves aroung sun angkuar momentum is constant.
University of Perpetual Help System DALTA was created in 1975.
The definition of star connection is a connection of the ends of phase windings at the star point.
hahahaa
dalta
Dalta, louisiana
i think its use for 3 phase connection.
Dalta is the word for foster child.
Compared with what?
The term, 'star point', refers to the common point of connection for the three windings of a star-connected (wye-connected) transformer connection. The star point is usually earthed (grounded) and provides the neutral point of the connection.
Probably the reason is in the different voltages between the star and delta connection voltages. An electromagnetic brake designed for the lower voltage of the star connection would burn out or open when introduced to the higher voltage of the delta connection.
Because it is the same current, as you can determine by examining a circuit diagram of a star connection.