What is stereo audio input?
That would be where you connect anything with a STEREO AUDIO OUTPUT.
Yes an auxiliary input is the same as audio input , aux input this port allows you to input audio from any portable audio source into the radio stereo
A microphone is a sound (audio) input device. Many computers also feature a "line-in" audio input port which can accept a stereo sounds signal, for example from a HiFi component. Speakers, headphones and "line out" connectors are all audio output devices.
An input is not an output. Some phones (like the iPhone) have a 4-conductor jack which incorporates a mono mic input. If you want to record in stereo with an iPhone, you can get one of a number of audio interfaces that connect to the 30-pin dock connector.
Get your Audio out Cables coming out of the Xbox360 and plug them into your AV-in on your stereo instead of the AV-in on the TV. Tune your Stereo to AV-in Input and you're sorted.
Not on an OEM stereo... it was some years afterwards before that became a thing.
Where you can plug in audio devices etc. Like Ipods, mp3 players, Cd players etc.
Computers normally have a 3.5mm jack socket as an audio output. Most stereo systems have phono (RCA) connectors for signal inputs. To connect a laptop to a stereo system you will need a 3.5mm jack to RCA lead. They can be purchased in most electronics stores or on line. Most audio systems have a selection of inputs. If there is a choice, you can use any input that is marked "aux", "line in", "CD", "DVD"… Read More
Yes, you can listen to an internet "radio" station on your stereo. If you do that, the audio might sound better than it does on your computer. You won't use the "AM/FM" part of your stereo, just the audio amplifier section. To do that, the stereo needs a jack (socket) somewhere on it that's labeled "LINE IN" or "AUX" or "INPUT". You need to get a cable to connect the audio from the computer to… Read More
You can listen to an internet "radio" station on your stereo. If you do that, the audio might sound better than it does on your computer. You won't use the "AM/FM" part of your stereo, just the audio amplifier section. To do that, the stereo needs a jack (socket) somewhere on it that's labeled "LINE IN" or "AUX" or "INPUT". You need to get a cable to connect the audio from the computer to the… Read More
Connect the av cable video plug to the composite video in (yellow). Connect the left and right audio to the stereo audio input, or connect these to your surround sound system.
Connect the Audio Out of the Sony set (Left + Right RCA) to the audio input of the X600 (1/8" stereo). You will need an adapter y-cable.
There are no dedicated PC inputs in the rear of this Alba LCDW16HDF model. There are, however, an HDMI, a SCART connector, Component Audio/Video Inputs (YPbPr), a S/PDIF input (digital audio input), an RF Input to connect to an antenna or a coaxial cable, and finally, there are stereo audio line outs. The HDMI input is compatible with the DVI outputs found on more modern PCs-all that is required is a simple pin adapter. Picture… Read More
1080 is a video standard and has nothing to do with the audio. Connect the stereo audio outputs of the tv to the inputs of the home theater. Check the HT menu to be sure it is set for multi channel audio on the input you are using.
No, but Radioshack sells a device that will take 1 input of stereo audio/video including a S-Connector and give 4 outputs to run to other devices. Its called a distribution amplifier, for about $45.
Connect a audio cable from the Audio Out connectors on the cable box to the AUX In Audio connectors on the stereo receiver.
Yes you can. there are a few ways to input audio from your Android phone or device to the radio, the best way is if you have the aux input jack just purchase a 3.5 headphone cable to 3.5 the same connector in both ends if you don't have any ways to input audio , you can use a Bluetooth or FM transmitter, i like the Bluetooth better because there are no cables and you… Read More
Simply put, it is an "extra" audio input that allows a device to accept the audio signal from an external audio player.
If you're just trying to play sounds through your mics input, you need to enable wave out/stereo mix on your soundcard. If you can't find either wave out or stereo mix then your soundcard might not support them, sorry. Once that's enabled all audio you play will stream through your microphone.
Real simple. Buy a USB head set. this will allow you to have a digital vs. analog audio which is much more desirable. If you by a headset with a mic it will also allow you to record audio with the ability to edit more quickly and easily with less static or the chance of the analog connector being damaged. Answer Yes! all of them do! go to radio shack to find the part to… Read More
Your hd flatscreen does not have HDMI input can you still plug a playstation3 in and get good image quality and how about the bluray image from same?
next down in quality from HDMI is DVI picture with digital audio (actually the same, just split into 2 streams)). next down in quality from HDMI is DVI picture with analog audio (stereo only) next down in quality is component video (3 wires) and digital (optical) audio next down in quality is SVHS picture with digital (optical) audio) then the same two above only with analog audio, stereo only. last is composite video and analog… Read More
I was wondering the same thing. Does anyone know if changing your am/fm/cd selector switch to a 4 position switch (the 4th being aux. input) would work? Yes you can add auxiliary audio input to any stereo but you will need to solder a 5 pin aux 3.5 jack into the radio board before the radio preamp after the FM output, there are 2 cables for audio in 2 cables for audio out and 1… Read More
Just connect the to main speaker leads to the input, the receiver will do the rest. Don't cross the wires trying to get all audio function. This could blow both units. Keep the volume low on your sending unit for the input is preamp only. Or you can Buy a converter....If one exists.
Is there an audio in jack on the back of a 2002 Santa Fe's OEM stereo to install Sirius satellite radio?
There are several audio systems for the 2002 Santa Fe, but none has a separate audio input jack. See pp SD-146,SD-147, SD-148 schematic diagrams of the 2002 Electrical Troubleshooting Manual.
All GMC Envoy radios from 2003 and up have the option for auxiliary audio input, satellite radio or rear DVD, If there is no rear video system in the GMC envoy most likely there is no aux audio input, the good news is that you can add one to the factory radio, that is the reason why you have a BAND and CD AUX button the audio input interface plugs into the back of the… Read More
The most common used audio input device is the webcam
There are several computers in the Macintosh range from the Mac Mini to the Mac Pro. What ports you have depends on the type of Mac you have but they will have ports such as: Gigabit Ethernet port Mini DisplayPort Audio in/out SD card slot FireWire 800 port USB 2.0 ports Optical digital audio input and output TOSLINK ports Analog stereo line-level input and output minijacks
There isn't one. If you wand an AUX input, you need to buy an adapter or an aftermarket stereo. There isn't one. If you wand an AUX input, you need to buy an adapter or an aftermarket stereo.
An Audio CD is a type of CD that has audio files on it that can be read by a CD player like a stereo
If I understand the question, you are trying to intertwine different functions. Like your ears, the audio input jack receives an audio source, while the audio output jack transmits outputs audio content - similar to your mouth. If you are trying to redirect the input audio directly to the audio output port you will need a "passthru" (aka monitor) function. -P2E
To connect one speaker to the right and left outputs of a stereo amplifier, split the input into two parts. These should go to the left and right signals. The input of the amps should be a stereo input.
it depends if u are using the stock stereo then no but if it is not a stock stereo then u may have an aux input jack which comes out the back of the stereo the easiest way is to just pull out the stereo and take a look
Audio input is bringing sound signals into a device from another device, typically using a plug or jack.
Connect the two plugs of the audio cable to the (white plug) left and (red plug) right output jacks for the take deck on the home stereo. Insert the plugs on the other end into the corresponding left and right input jacks of the amplifier. Set the component selector on the home stereo to Tape 2 and the amplifier's component selector to the set of jacks connecting it to the home stereo.
Your TV will need to have some sort of audio output. Some do, many don't. A dedicated audio output on a TV will usually be an analog stereo mini jack connection, or a newer model may have an optical or coaxial digital audio output. These will need connecting to an audio input on your sound system amplifier. If your TV has a headphone output, you can sometimes connect this to your amplifier and get a… Read More
The audio outs should go to a AUDIO IN on your stereo system. You might need audio adapters to make the easy.
Advanced Audio Distribution Profile (A2DP) A2DP describes how stereo-quality audio can be streamed from a media source to a sink. Usage Scenarios Put simply, this is a Bluetooth enabled music player (i.e. MP3 player, walkman, stereo, etc.). The audio source is the music player and the audio sink is the wireless headset or wireless stereo speakers.
Some of the stores that sell Alpine Audio products are as follows, Best Buy, California Custom Stereo, Super Tint, Super Stereo, Audio Innovations of Fresno.
Stereo VCRs have extra connections on the back to send the stereo to the TV or monitor. I don't believe you will find one with a stereo RF output. If you want to send a stereo audio signal to another room hook up a stereo modulator to the stereo RCA ouputs of the VCR and connect a MTS compatible TV to the coax at the other end and you will get the stereo audio.
Audio in is and audio input that can be used for recording purposes http://www.audio-dvd-maker.com
Just plug yellow to yellow, and white to white. Yellow is video, red and white are stereo audio, but if you have no stereo input, you just use the white (i.e. mono). For some cables you use red instead of white, but this is rare. In some games, you can go into the settings and choose mono instead of stereo.
Yes it is possible, first you need a 3.5mm to rca jacks cable this will connect the audio from your laptop to the radio receive using one of the inputs from he back side If this is to be use in a car stereo , you will need to add an auxiliary audio input interface to your car radio
The input and output is user defined. The input is devices the user operates to input data, images, videos, and audio to the computer. Output is the devices that put out data, images, video, and audio.
An AUX input has to be supported by both the hardware and the software of the stereo. Generally this will require a complete replacement.
Should you play the stereo sacd through 2Ch audio out or 5.1Ch audio out ie Front-Left Front-Right channel?
As you said if the file is stereo (as in left and right, two channels), you should route it to 2CH audio out
There isn't one. Only solutions are to buy a fm transmitter or an adapter for the stereo. All GMC Envoy radios from 2003 and up have the option for auxiliary audio input, satellite radio or rear DVD, If there is no rear video system in the GMC envoy most likely there is no aux audio input, the good news is that you can add one to the factory radio, that is the reason why you… Read More
stereo mixer output to powered mixer input
An 'amplifier' usually refers to an audio amplifier for a HiFi stereo system. (Although amplifiers are used in other devices, such as Radio transmitters, and is an electronic device for making a signal bigger.) A stereo amplifier usually has inputs for various signal sources, such as phono, microphone, tuner, aux etc. It has outputs for speakers. It takes a small input signal and boosts it to drive a loudspeaker and has controls to select the… Read More
Depends on what you are connecting. If using MIDI, you'll need a good USB-MIDI device. If using audio, you'll just plug the output into a 1/4"-1/8" adaptor and plug that into your computer's audio input. I personally use a mono-stereo splitter into a mixer, then into my computer.
It's a line level input that accepts audio source signals such as those from an mp3 player, iPod iPhone, or any portable audio source etc so that you can hear them. hardware to hardware in. plug one end into the aux jack on the Oem stereo, and the other into the portable audio device and you'll get way better sound quality than if using an FM transmitter, auxiliary interfaces are not tape adapters FM transmitters… Read More
Not knowing exactly what type of connectors are on both pieces of equipment, many TVs have RCA type connectors (round with holes on the middle of the female connectors) and are colored in Red Yellow and White. Assuming you have these types of connectors on both your TV and your stereo, get an RCA cable of sufficient length and connect the Red connector on the cable to the Red AUDIO output on the TV; connecting… Read More