Stray losses refer to secondary voltage to be inappropriately distributed to transformers, induction motors and generators. Stray losses essentially mean that there is leakage that causes a weakening of the voltage being delivered to the motor.
stray losses,armature copper losses,iron losses(Hysteresis and eddy current losses),mechanical losses(friction and windage losses)
Stray dogs often bark. stray luggage can have explosives in it.
to stray = ta'ah (תעה) stray (adjective) = to'eh (תועה)
Laminations minimize eddy currents, or current flow across the iron parts. This is one method to minimze stray losses.
The primary disadvantage of this circuit is that stray capacitances are much more significant than with the Dickson multiplier and account for the larger part of the losses in this circuit
A three phase induction machine have the Following losses:- 1. Stator core loss 2.Stator Ohmic loss 3.Rotor core loss 4.Rotor ohmic loss 5.Friction losses 6.windage losses 7.Stray losses 8.Also it'll depends upon the types of motor as if it is a slip ring type IM then it will have sparking losses at slip contact etc etc which are very small in comparison to above losses. Regards,,
Did you see that stray cat run across the street.You can't stray very far off the path. That stray cat has returned.
Yes, all electronic components have both stray capacitance and stray inductance.
The Stray Cats!
stray capacitance calculation
In Power Transformer in higher rating to minimise the Stray losses (losses caused by leakage flux linking with structural part- tank - yoke plates) Tank shunts shunt the leakage flux and contains it within. shunts are made of CRNGO.