Looking for the same thing i can only hazard a guess that it will be close to that of pure water and it would vary from region to region. The specific heat capacity of water is 4.18 J/(g x °C).
Water heaters are normally set to temperatures well below boiling; 140 degrees Fahrenheit is typical. Also, some heat loss occurs as the water travels through the pipes from the heater to the tap, so the water generally emerges at closer to 120 degrees, which is nowhere near boiling.
The cold tap water transports the heat of the hot Milo away (especially if the Milo container is thermally conductive (a metal or very thin) and especially if both the surrounding cold water and the hot drink are stirred.Therefore, it cools down faster!
That depends very much on how impure your tap water is. For all intents and purposes, you can probably use 1.33 as the value (it shouldn't be too far off from that, and to get an exact number you'd have to get your tap water tested).
All polymer based fibres / products will shrink when heated. The type of polymer dictates the level of heat required, while I do not know the specific temperature this occurs for Rayon, I am guessing maybe 180 C to 200 C. That is why the warning label says "do not tumble dry"... To safely see the shrinkage effect, fill a everyday water bottle with hot water from a tap !
tiorklitkriirkl;tiofklyiipropyk
tap water
No they heat at the same speed.
Heat
No. not if they are at the same temperature when you start to heat the water.
Yes you can. Tap water has minerals in it too. You can heat any substance: heat is the amount of energy, so your just adding energy.
Because melted ice will still be a lot colder than the tap water.
The minerals in the water will react with the acid and become compounds that will affect the life and capacity of the battery.
yeah.. Tap water will evoporate faster since Carbonated water is usually containing salts, charged under pressure with purified carbon dioxide gas, used as a beverage or mixer which make it or requires much heat. While the Tap water which Water drawn directly from a tap or faucet can evaporate quickly.
A cup of boiling water since it has higher temperature. Note that heat transfer depends more on the temperature.
A cup of boiling water since it has higher temperature. Note that heat transfer depends more on the temperature.
A cup of boiling water since it has higher temperature. Note that heat transfer depends more on the temperature.
There isn't a specific standard length for the unprotected length of a tap conductor in relation to the current carrying capacity of a main conductor. The length of the tap conductor is typically determined by factors such as voltage drop and local electrical codes. It is recommended to consult the National Electrical Code (NEC) or an electrical professional for specific guidance on tap conductor lengths.