Full it until it starts drizzling out of the fill hole on the transfer case.
will a 95 chevy k1500 transfer case hook up to a 96 chevy k1500 transmission
To check the transfer case fluid on your 1994 K1500 Chevy truck, first ensure the vehicle is on a level surface and the engine is off. Locate the transfer case, typically found behind the transmission, and look for the fill plug on the side of the case. Remove the fill plug using a wrench; the fluid should be at the level of the hole. If it’s low, add the appropriate type of transfer case fluid until it starts to seep out of the hole, then replace the plug securely.
towing capacity up to 10000 lb for a 1995
it's located in the rear of the transfer case
5Qts. with a new filter.
The transmission fluid needed for the 1989 Chevrolet K1500 with a manual transmission is Synthetic Synchromesh transmission fluid (5W-30) (MTFQT). If the transmission you have is the MG5 5-speed, the capacity is 4.2 pints. If the transmission is the SM465/M20, the capacity is 8.5 pints.
5 quarts
NO.
The gross weight rating capacity on your 1995 K1500 suburban is stated at 3000 pounds. The towing capacity of your 1995 K1500 is stated at 7500 pounds.
The 1996 General Motors/Chevrolet K1500 4WD PU came equipped in 4 engine codes. The standard equipment 4.3L Vortec (code 'W') has a cooling system capacity of 13.2 quarts.
YES. They are the same.
What all does the ECM computer control on my 2006 Chevy k1500 Silverado