C1295 means (Brake lamp switch circuit open). Most likely a bad brake switch on the brake peddle, or a bad capacitor between the 2 switches.
.
You have to fix the cause of the code that turned the light on. You will need a scanner to read the code.
If the abs light is on you need to have the code(s) read. Have an auto parts store read them for you. The code(s) will help direct you to the problem so you can fix it. Once the problem is fixed the light will reset itself after a short drive.
To fix a Mazda 3 ABS light 05 plate from staying lit you will need to see a dealer. They will need to use their computer to reset the code as long as the ABS light is faulty and not the actual ABS system.
You'll need to find out what's wrong with the ABS. You may need to take it to a brake shop or the dealer to read the diagnostic code from the ABS computer. If the light is on, the computer has a code for you to read.
Fix the problem. The code will disappear after 50 starts
You have to fix the cause of the code that is set in the ABS module.
it cant be fixed just tightend your gas cap harder
code: torque converter CKT Performance Or stuck off
The code P0 400, in your Chevrolet Geo tracker, is a reference to the ABS braking system not working properly. In most cases when the ABS braking system is not working properly you will need to change the sensor.
Not much you can do to fix an ABS module. Replace it with a new one.
You need to fix the problem that causes the code in the abs computer. You can then clear the code with the scan tool or wait for it to self clear while driving.
It would be best to have a repair shop diagnosis it for you. A code 14 is the Enable Relay circuit open. It could be a bad ground, a bad Enable Relay or the Abs hydraulic unit is defective.jd