What is the Comcast remote control code for the Black Friday 32 inch LC320EM1 Emerson LCD?

Answer 1

Comcast remote control code is 21111. Used code search option by using procedure #1 listed below. I then checked/verified code using procedure #2 listed below

#1.

Searching For Your Code

If your home entertainment device does not respond to the remote control after trying all of the codes listed for your brand, or if your brand is not listed at all, try searching for your code.

For example, after trying all of the codes for your TV, you still cannot get the remote control to operate your TV, then:

1. Turn on your TV.

2. On the remote control, press TVonce. Then press and hold Setup until the TVkey blinks twice, then release Setup.

3. Enter 9 - 9 - 1. The TVkey will blink twice.

4. Press and release the digit 1. The TVkey will blink twice.

Note: Substitute 1 with 0 if searching for a Cable code, 2 if searching for a DVD, VCR or PVR and 3 if searching for an Audio device

5. Press Power and aim the remote control at the TV and press CH + one or more times until the TV turns off.

NOTE: In the search mode, the remote control will send IR codes from its library to the selected device, starting with the most popular code first.

6. Press Setup once to lock in the code.The TVkey will blink twice.

7. To search for the codes of another device, repeat steps 1 to 5, but substitute the AUX key for the device you are searching for.

#2

Checking the Codes

If you have set up the remote control using the Searching For Your Code procedure, you may need to find out which five-digit code is operating your equipment. Perform the following steps after setting up your devices to find out which five-digit code operates your equipment. For example, to find out which code is operating your TV:

1. Turn on your TV.

2. On the remote control, press TVonce. Then press and hold Setup until the TVkey blinks twice, then release Setup.

3. Enter 9 - 9 - 0. The TVkey will blink twice.

4. To view the code for the first digit, press 1 once. Wait 3 seconds and count the number of times the TV key blinks (e.g., 3 blinks =3) and write down the number in the left most TV Code box (at end of this section).

NOTE: If a code digit is "0", the selected mode key will not blink.

5. Repeat step 4 four more times for the remaining digits. Use 2 for the second digit, 3 for the third digit, 4 for the fourth digit and 5 for the fifth digit. Finish writing down the code in the TV Code boxes (at end of this section).

6. To check another device code, repeat steps 1 to 5, but substitute the AUX key for the auxiliary device you are checking. Write down the codes in