1200 degrees
Mack cyclinder head
It has got 6 engine cyclinder
The engine's thermostat controls the engine coolant temperature. The temperature control inside for the heater controls the cabin heat.
This temperature is 598,15 K.
lets you know from inside the car if your engine is running at the proper operating temperature.
As long as it is running. The engine cannot function if fuel is not being injected into the cyclinder.
it is under hood. Look between the right side of engine and the master cyclinder. You will see it there.
As a "heat engine", a car engine must rid itself of heat to continue. Efficiency of the heat engine depends on the difference in temperature; therefore, as the temperature outside reaches the temperature inside, the engine stops.
Temperature inside the diesel engine combustion chamber is approximately 320 degree Centigrade Celsius.
The temperature inside the internal combustion engine is approximately (300-400)'c because most of the cylinder manufactured by composition of aluminium alloy and other material.aluminium melting point was nearly the 652'c. so above this temperature it goes to the molten state.
WELL THE BEST THING TO DO WHILE THE KEY IS IN THE IGNITION IS TO REMOVE THE CYCLINDER IF ITS LIKE MOST VEHICLE THERE IS A PIN HOLE KEY CYCLINDER WITH A PAPER CLIP INSERT IT IN THE PIN HOLE TURN THE KEY AND REMOVE THE CYCLINDER IN SOME VEHICLE YOU HAVE TO REMOVE THE STEERING COLUMN COVER AND PUSH THE PIN IN AND REMOVE THE CYCLINDER WHICH EVERWAY YOU HAVE TO REMOVER THE CYCLINDER GOOD LUCK
There are O rings in between cyclinder cover and cyclinder. One for each spark plug. Open cynclinder cover (4 screws on top of engine) and you will see these rings. Replace with new one, clean oil left in spark plug tube, and also change your cyclinder cover gasket. It is easy to change. Good Luck!