A splitter valve is used on a multiple countershaft transmission to provide extra gears in conjunction with the range valve. A range valve actuates an extra set of gears in the auxilliary section to provide both a high and a low range, providing up to ten forward speeds and two reverse speeds. The splitter valve works another set of gears in the auxiliary section and allows each of those forward gears to be "split" yet again, thus providing up to twenty forward speeds.
A splitter valve has a blow off valve sound but it redirects the airflow. It combines the features of a diverter valve and blow off in one housing.
Typically, you can find the transmission modulator valve near the rear of the transmission. Its function is to control and regulate pressure.
The modulator valve uses hydrological pressure to shift a transmission !
If you are asking the function of a modulater valve,it is to smooth out the shifts in an automatic transmission.
The function of the wasegate valve is to divert exhaust gases away from the turbine in the engine system. This enables it to control the speed of the turbine.
on top of the valve body inside the transmission
4- speed std.? None
On the four speed automatic, it is inside the transmission on the valve body. On the three speed, it is on the front of the transmission case.
in the valve body in transmission pan
its located in the valve body of the transmission
in the valve body which is inside the transmission.
The shift solenoids on a four speed are on the front, be low the cooler hoses. The solenoids on the six speed are inside the transmission on the valve body.