There is no direct correlation between engine displacement and horsepower. One 1800cc engine may produce lots of horsepower, while another of the same size will produce more torque but not as much horsepower. It depends on the engine design and what it was made for...In general, a long stroke, slow turning engine will produce more torque but less horsepower than a fast spinning short stroke engine.
A typical example would be a 1400cc sport bike, like the Suzuki Hayabusa, which turns out almost 200 horsepower, while a larger 1500cc V-twin Kawasaki Vulcan
The first Honda Goldwing with fuel injection was the 1985 LTD model produced until 1987. When the Goldwing engine was enlarged to 1800cc in 2001 then that model and all susequent models had fuel injection.
200 horse power
By changing the engine oil, that covers it.
Under the engine, right side, in the back.
The drain bolt in under at the rear of the engine.
EX has a better engine. V-Tec and such. SE has a base engine. I was told the se stands for the special edition. like the 10th anniversary , and ( or ) GOLD trim.
Honda
Depends what's wrong with it. You did not say what it is doing. If it is inside the engine, then the engine must be removed to do the job. You can take out the plates with the engine in the frame, but, if other parts need to be serviced, then ypu pull the engine.
Found it out. Its a Chinese copy. Not a real CR 125.
1200 engine, oil cap. is 3.2 liters or 3.4 U.S. qt's.
The gl 1200 model is from 1984 to 1987. The only difference that shows in my manual is valve timing and maybe a few other things, unless it is fuel injected, or the aspencade model. Otherwise I do not see a problem. If you have the engine on the bench, then might be a good idea to change the stator and check the clutch.
The configuration of the engine. Subarus, Honda Gold Wing and BMW R-series motorcycles and piston-powered airplanes have the same engine configuration, and they all sound like Volkswagens.